Rear Control Panel; Buttons And Interface Location - Haier P42A1-AKS Owner's Manual

Buttons and interface location

VGA IN
L R
AUDIO OUT VGA AUDIO
1. AUDIO OUT:
Connect to optional external speaker(s).
2.VGA IN(PC)
Connect VGA analog cable from the PC to the VGA IN. Connect the audio cable from the PC
to the VGA AUDIO IN.
3.COMPONENT IN
Connect the component cables from the component output of the video device to
COMPONENT IN. Connect the audio cable from the video device to the
COMPONENT AUDIO IN.
4.DVI IN (HDMI-IN)
Connect the HDMI cable from the HDMI output of the digital video device to the HDMI/DVI
VIDEO.(If the PC has DVI only,Connect the audio cable from the digital video device to the
AUDIO .)
5-6.SCART2/SCART1
Used to connect to the DVD/ VCR/ broadcasting receiver or other equipment.
7.Earphone port
8.ANT IN:
Connect antenna or CATV 75
9. SWITCH and AC INPUT: Power switch and AC power input.
Rear
Control panel
COMPONENT IN
Pr/Cr Pb/Cb Y L-AUDIO-R HDMI/DVI VIDEO
DVI IN
SCART2 SCART1
AUDIO
coaxial cable to receive TV/CATV signal.
SWITCH
AC-INPUT
ANT IN