Remote Controller - Haier P37K1 Owner's Manual

Remote controller

Battery loading
1.Slide open the cover of the battery compartment on the back of the remote controller.
2.Load two 7# (AAA)alkaline batteries in the compartment. (plus and minus poles to
respective mark)
3.Replace the cover of the battery compartment.
1
Precautions
As strong light may interfere the
signals, change your position to
operate the remote controller if
the television cannot be turned
on or off as you expect.
Keep the remote controller away from
heat source or humid area to ensure
effective performance of the remote
controller.
2
Make sure that two AAA alkaline batteries
are loaded. The batteries must be of the
same type. The batteries must be located
properly. The batteries are not
rechargeable.
Make sure that there is no obstacle between
the remote controller and television set.
3
6