Summary of Contents for SilverCon SCW001s
-
Page 1: User Manual
SilverCon SCW001s 300Mbps Wireless Router User Manual Shenzhen Santone SilverCon Email: sales@silver-con.com Web: www.silver-con.com... -
Page 2: Table Of Contents
6.6 Access Control ....................... 41 6.7 Dynamic DNS ......................48 6.8 Static Routing ......................48 6.9 Security Options ....................49 6.10 System Tools ......................52 6.11 Logout ......................... 58 Chapter 7: Troubleshooting ............60 Shenzhen Santone SilverCon Email: sales@silver-con.com Web: www.silver-con.com... -
Page 3: About User Manual
• Support restricting IP bandwidth • Support filtering by keyword and domain name • Support wireless security authentication • Support 3 types of WAN connection modes, including static IP, dynamic IP, and PPPoE Shenzhen Santone SilverCon Page: 3 Email: sales@silver-con.com Web: www.silver-con.com... - Page 4 SCW001 User Manual • Support remote access control • Support firewall • Support system status display • Support backup and restoration of configuration file Shenzhen Santone SilverCon Page: 4 Email: sales@silver-con.com Web: www.silver-con.com...
-
Page 5: Chapter 1: Safety Precautions
• Do not connect this device to any PC or electronic product, unless our customer engineer or your broadband provider instructs you to do this, because any wrong connection may cause any power or fire risk. • Do not place this device on an unstable surface or support. Shenzhen Santone SilverCon Page: 5 Email: sales@silver-con.com Web: www.silver-con.com... -
Page 6: Chapter 2: Overview
SOHO (Small Office, Home Office). 2.2 Packing list Please check whether your packing list includes the following items: • Wireless router x 1 • Power adapter (12V DC,500mA) x 1 Shenzhen Santone SilverCon Page: 6 Email: sales@silver-con.com Web: www.silver-con.com... -
Page 7: Chapter 3: Hardware Description And Hardware Installation
RJ45 LAN interfaces, for connecting hub, switch, or computer in a LAN. LAN3/LAN4 This button is used for enabling WPS PBC mode. When WPS is enabled, press this button, and the AP starts to accept negotiation of PBC mode. Shenzhen Santone SilverCon Page: 7 Email: sales@silver-con.com Web: www.silver-con.com... -
Page 8: Hardware Installation
For example, the outdoor straight transmission distance for a certain device can be 300 meters and the indoor transmission distance can be 100 meters. 3.5 Roaming Shenzhen Santone SilverCon Page: 8 Email: sales@silver-con.com Web: www.silver-con.com... - Page 9 • Wireless routers must keep coverage of uninterrupted wireless signals in the whole operation environ- ment. Hence, please put wireless routers to the appropriate places. Shenzhen Santone SilverCon Page: 9 Email: sales@silver-con.com Web: www.silver-con.com...
-
Page 10: Chapter 4: Tcp/Ip Settings And Wireless Connection Introduction
1. Right-click the icon of My Network Places and choose Properties from the menu. The Network Connec- tions window appears. 2. Right-click the network adapter icon and choose Properties from the menu. The Local Area Connections Properties window appears. Shenzhen Santone SilverCon Page: 10 Email: sales@silver-con.com Web: www.silver-con.com... - Page 11 192.168. 1.X (X is a number in the range of 2 to 254). If you want to access the Internet through a wireless router, you need to enter the default gateway and IP address of the DNS server correctly. Shenzhen Santone SilverCon Page: 11 Email: sales@silver-con.com...
-
Page 12: Wireless Connection Introduction
7. If the PC can ping through the default IP address of the wireless router, the following page appears, indicating that the connection between your PC and the wireless router is normal. 4.2 Wireless Connection Introduction Shenzhen Santone SilverCon Page: 12 Email: sales@silver-con.com... - Page 13 3. If you are not sure of the available SSID, please log in to the Web page of the wireless router, and view the SSID in the Wireless Basic Settings page of the wireless settings. For more information about the wireless settings, please refer to 6.4 “Wireless Settings”. Note: Shenzhen Santone SilverCon Page: 13 Email: sales@silver-con.com Web: www.silver-con.com...
- Page 14 After your wireless network card connects to the wireless router successfully, usually, you should set the network adapter to Obtain an IP address automatically. The configuration of wireless connection is now complete. Shenzhen Santone SilverCon Page: 14 Email: sales@silver-con.com Web: www.silver-con.com...
-
Page 15: Chapter 5: Logging In To The Web Page
Caution: If you are managing the wireless router through the Web page, do not cut off the power supply. Otherwise, the device may be damaged. Shenzhen Santone SilverCon Page: 15 Email: sales@silver-con.com Web: www.silver-con.com... -
Page 16: Chapter 6: Web Configuration
Click Next and the following figure appears: Enter the host name provided by the Internet service provider (ISP) in the Account Name field. If the ISP does not provide it, you need not modify it. Shenzhen Santone SilverCon Page: 16 Email: sales@silver-con.com... - Page 17 After setting, click Finish and the settings take effect immediately. The setup wizard is now complete. (3) If the detected broadband type is PPPoE, the following figure appears: Click Next and the following figure appears: Shenzhen Santone SilverCon Page: 17 Email: sales@silver-con.com...
-
Page 18: Running Status
After setting, click Finish and the settings take effect immediately. The setup wizard is now complete. 6.2 Running Status Click Running Status and the extended navigation menu is shown as follows: The submenu contains Router Status and Clients List. 6.2.1 Router Status Shenzhen Santone SilverCon Page: 18 Email: sales@silver-con.com Web: www.silver-con.com... - Page 19 This page displays the performance statistics information of the router, including the numbers of sent and received packets at each port. The following table describes parameters in this page: Field Description System Up Time Display the time period that the router is running. Shenzhen Santone SilverCon Page: 19 Email: sales@silver-con.com Web: www.silver-con.com...
-
Page 20: Button Description
Click the button to interrupt the WAN connection. Disconnect Click the button to start a new WAN connection. If the WAN connection is set to DHCP, the Connection Status page is as shown in the following figure: Shenzhen Santone SilverCon Page: 20 Email: sales@silver-con.com Web: www.silver-con.com... -
Page 21: Network Settings
MAC address of each computer. Click Refresh to refresh the information of the connected computers. 6.3 Network Settings Click Network Settings and the extended navigation menu is shown as follows: Shenzhen Santone SilverCon Page: 21 Email: sales@silver-con.com Web: www.silver-con.com... - Page 22 If it is selected, the router serves as the DHCP server and automatically assigns IP Server addresses for all connected computers. Starting IP Address The first address in a consecutive IP address pool. Ending IP Address The last address in a consecutive IP address pool. Shenzhen Santone SilverCon Page: 22 Email: sales@silver-con.com Web: www.silver-con.com...
- Page 23 LAN must be set to the new IP address for Inter- net access. • The subnet mask of all hosts in the LAN must be consistent with the subnet mask specified in the LAN Interface Settings page. Shenzhen Santone SilverCon Page: 23 Email: sales@silver-con.com Web: www.silver-con.com...
- Page 24 ISP. Select this connection mode if the ISP does not provide any IP network parameters. See the following figure: The following table describes parameters in this page: Shenzhen Santone SilverCon Page: 24 Email: sales@silver-con.com Web: www.silver-con.com...
- Page 25 If the ISP provides the information of the IP address, subnet mask, gateway, and DNS server, select Static IP (Fixed). For detailed settings, refer to your ISP. The following table describes parameters in this page: Shenzhen Santone SilverCon Page: 25 Email: sales@silver-con.com...
- Page 26 The format of a MAC address is XX:XX:XX:XX:XX:XX. After setting, click Apply to save the settings. • PPPoE If the ISP provides the user name and password for PPPoE dialup, select PPPoE. Shenzhen Santone SilverCon Page: 26 Email: sales@silver-con.com Web: www.silver-con.com...
-
Page 27: Wireless Settings
The format of a MAC address is XX:XX:XX:XX:XX:XX. After setting, click Apply to save the settings. 6.4 Wireless Settings Click Wireless Settings and the extended navigation menu is shown as follows: Shenzhen Santone SilverCon Page: 27 Email: sales@silver-con.com Web: www.silver-con.com... - Page 28 Ethernet clients, or other devices. Network name. The SSID can contain up to 32 characters and can be letters, nu- Name (SSID) merals, underlines, and any combinations of them. The SSID is case-sensitive. Shenzhen Santone SilverCon Page: 28 Email: sales@silver-con.com Web: www.silver-con.com...
- Page 29 This option is not recommended. • Wep: Wired equivalent privacy. You can encrypt the data with WEP 64 bits or 128 bits. The following table describes parameters related to the WEP mode: Shenzhen Santone SilverCon Page: 29 Email: sales@silver-con.com...
- Page 30 The following table describes parameters related to the WPA2-PSK (AES) mode: Field Description PassPhrase Enter 8-63 characters or 64 hexadecimal digits. • WPA-PSK(TKIP)+ WPA2-PSK(AES): It allows the client to use WPA-PSK(TKIP) or WPA2-PSK (AES). Shenzhen Santone SilverCon Page: 30 Email: sales@silver-con.com Web: www.silver-con.com...
- Page 31 If you enable guest network, a visitor can use Internet connection in your home without knowing your wireless password. Choose Wireless Settings > Guest Network and the Guest Network page appears. The following table describes parameters in this page: Shenzhen Santone SilverCon Page: 31 Email: sales@silver-con.com Web: www.silver-con.com...
- Page 32 SSID and wireless security settings with the router. There are two WPS modes: Push Button and PIN. Click Next to select the WPS mode. • Push Button mode Shenzhen Santone SilverCon Page: 32 Email: sales@silver-con.com...
- Page 33 WPS connection is established, the following page appears. The client can now visit the LAN. 6.4.4 Wireless Advanced Settings Choose Wireless Settings > Wireless Advanced Settings and the Wireless Advanced Settings page appears. Shenzhen Santone SilverCon Page: 33 Email: sales@silver-con.com...
- Page 34 Settings random SSID and security key that are automatically generated. You can select this option in the Wireless Basic Settings page. Shenzhen Santone SilverCon Page: 34 Email: sales@silver-con.com Web: www.silver-con.com...
- Page 35 MAC address of the wireless network card. You can enter up to 16 entries of MAC addresses. Device Name Name of the device. You can customize one. Mac Address Physical address of the network card. It is a string of 12 characters. Shenzhen Santone SilverCon Page: 35 Email: sales@silver-con.com Web: www.silver-con.com...
- Page 36 You can add up to four repeaters. The central base station forwards the Wireless Basic Station data of communication between repeaters to the destination repeaters. Repeat- ers should be configured accordingly. Repeater MAC Ad- Enter the physical address of the repeater. dress 1/2/3/4 Shenzhen Santone SilverCon Page: 36 Email: sales@silver-con.com Web: www.silver-con.com...
-
Page 37: Forwarding Rule
Enter the IP address of the computer on which the service is to be provided. Click the button to add a service. Display the information of configured services, including the service name, start Service List port, end port, and server IP address. Shenzhen Santone SilverCon Page: 37 Email: sales@silver-con.com Web: www.silver-con.com... - Page 38 Choose Forwarding Rule > Port Triggering and the Port Triggering page appears. Shenzhen Santone SilverCon Page: 38 Email: sales@silver-con.com Web: www.silver-con.com...
- Page 39 • Single address: Enter the IP address of the network card on the PC. Then, the service is applied only on the specific network card of the PC. Indicate the protocol used at the triggering port. You can select TCP/UDP, TCP, or Service Type UDP. Shenzhen Santone SilverCon Page: 39 Email: sales@silver-con.com Web: www.silver-con.com...
- Page 40 This table shows the IP addresses of UPnP devices that are connected to the UPnP Portable Table router and open (internal and external) ports on the devices. It also lists the types and status of the open ports. Field Description Shenzhen Santone SilverCon Page: 40 Email: sales@silver-con.com Web: www.silver-con.com...
-
Page 41: Access Control
WAN. When a user tries accessing a restricted website, a message appears, indicating that the firewall restricts access to the website. The following table describes parameters and buttons in this page: Shenzhen Santone SilverCon Page: 41 Email: sales@silver-con.com... - Page 42 Choose Access Control > Block Services and the Block Services page appears. In this page, you can set rules of service blocking, to block users from Internet access. The following table describes parameters and buttons in this page: Shenzhen Santone SilverCon Page: 42 Email: sales@silver-con.com...
- Page 43 Other- wise, other relevant ports are not open. Ending Port Set the end port of the service port range. Shenzhen Santone SilverCon Page: 43 Email: sales@silver-con.com Web: www.silver-con.com...
- Page 44 Turn Bandwidth Con- If the value is in units of Kbps, the maximum value is 1000. If the value is in units trol On of Mbps, the maximum value is 100. Shenzhen Santone SilverCon Page: 44 Email: sales@silver-con.com Web: www.silver-con.com...
- Page 45 Click the Add Priority Rule button and the QoS – Priority Rules page for an application appears: The following table describes parameters in this page: Field Description QoS Policy For Enter the name of the QoS policy. Priority Category Select Applications. Shenzhen Santone SilverCon Page: 45 Email: sales@silver-con.com Web: www.silver-con.com...
- Page 46 Ending Port Set the end port of the port range. The QoS – Priority Rules page for the Ethernet LAN port is as follows: Shenzhen Santone SilverCon Page: 46 Email: sales@silver-con.com Web: www.silver-con.com...
- Page 47 Click the button to add a priority rule to the MAC Device Add List. Select a priority rule in the MAC Device Add List and click the button to modify Edit the priority rule. Shenzhen Santone SilverCon Page: 47 Email: sales@silver-con.com Web: www.silver-con.com...
-
Page 48: Dynamic Dns
Static routing is a special type of routing that can be applied properly in a network to reduce the problem of routing selection and overload of data flow because of routing selection and to improve the forwarding Shenzhen Santone SilverCon Page: 48 Email: sales@silver-con.com... -
Page 49: Security Options
15. Usually, the value of 2 or 3 leads to the best performance. If the route is direc- tion connection, set the Metric to 2. After setting, click Apply to save the settings. 6.9 Security Options Click Security Options and the extended navigation menu is shown as follows: Shenzhen Santone SilverCon Page: 49 Email: sales@silver-con.com Web: www.silver-con.com... - Page 50 Indicate the number of other routers in the user network. Its value range is 2 to Metric 15. Usually, the value of 2 or 3 leads to the best performance. If the route is direc- tion connection, set the Metric to 2. Shenzhen Santone SilverCon Page: 50 Email: sales@silver-con.com Web: www.silver-con.com...
- Page 51 1492 bytes for PPPoE connection, and 1436 bytes for PPTP connection. bytes) Certain ISPs may require smaller MTU, but this is a rare case. Do not modify the value of MTU size unless it is necessary for your ISP connection. Shenzhen Santone SilverCon Page: 51 Email: sales@silver-con.com Web: www.silver-con.com...
-
Page 52: System Tools
Click System Tools and the extended navigation menu is shown as follows: The submenu contains Schedules, SNTP, Backup Settings, Set Password, Router Upgrade, and Traffic Meter. 6.10.1 Schedules Choose System Tools > Schedules and the Schedules page appears. Shenzhen Santone SilverCon Page: 52 Email: sales@silver-con.com Web: www.silver-con.com... - Page 53 In this page, you can set the time information of your router. It is strongly recommended to set the correct time on the router first. This ensures proper functioning of log, site blocking, and schedule, because these functions are based on the time setting in this page. Shenzhen Santone SilverCon Page: 53 Email: sales@silver-con.com...
- Page 54 Click Backup and select the path to save the configuration of the router as a local file. • Restore Click Browse… to select the configuration file in your computer and click Restore to load the selected file to the router. • Erase Shenzhen Santone SilverCon Page: 54 Email: sales@silver-con.com Web: www.silver-con.com...
- Page 55 Settings switches to the login page when you try performing the next operation on a page. After setting, click Apply to save the settings. Shenzhen Santone SilverCon Page: 55 Email: sales@silver-con.com Web: www.silver-con.com...
- Page 56 To avoid losing previous configuration of the router, save the configuration before upgrade. During upgrade, do not power off the router or press the Reset button. 6.10.6 Traffic Meter Choose System Tools > Traffic Meter and the Traffic Meter page appears. Shenzhen Santone SilverCon Page: 56 Email: sales@silver-con.com Web: www.silver-con.com...
- Page 57 Traffic Status page. If you select this option, all Internet access behaviors are blocked after the monthly traffic amount reaches the threshold. Shenzhen Santone SilverCon Page: 57 Email: sales@silver-con.com Web: www.silver-con.com...
-
Page 58: Logout
The logout function is used to log out the current login status. After logout, you need to log in again before accessing the configuration page of the router. For the method of login, refer to chapter 5 “Logging In to the Web Page”. Shenzhen Santone SilverCon Page: 58 Email: sales@silver-con.com... - Page 59 To log out the router, do as follows: 1. Click Logout under the System Tools menu and the following dialog box appear: 2. Click OK to log out. See the following figure. To return to the configuration page, click Cancel. Shenzhen Santone SilverCon Page: 59 Email: sales@silver-con.com...
-
Page 60: Chapter 7: Troubleshooting
• Because the router cannot be detected. (1) Try hard reset on the router and test again. (2) Check the settings of the wireless network. (3) Check the settings of SSID and encryption. Shenzhen Santone SilverCon Page: 60 Email: sales@silver-con.com Web: www.silver-con.com... - Page 61 (8) Check whether the PC that connects to the router can obtain the IP address through either the wire- less network or the cable network. (9) Check the LAN settings of your Internet options, and do not use a proxy server for your LAN. See the following figure: Shenzhen Santone SilverCon Page: 61 Email: sales@silver-con.com Web: www.silver-con.com...
Need help?
Do you have a question about the SCW001s and is the answer not in the manual?
Questions and answers