Page 1
Sam460ex User Guide version 1.2 – 19 March 2012 ACube Systems S.r.l. Via Tabacco, 58 - 36061 Bassano del Grappa, (Vi) – Italy Tel. +39 0424 393120 fax +39 0424 393119 www.acube-systems.biz www.sam4x0.com info@acube-systems.com VAT ID 03367150244 –REA VI-319762...
Page 5
Introduction Your Sam460ex board is ready to go. Just connect a hard drive, monitor, mouse and keyboard, and switch it on! It can be housed into a flex-ATX, micro-ATX or full ATX computer case. The use of a good quality ATX power supply is strongly advised for a correct operation of the board.
Page 7
- USB mass storage - internal SD card reader J31 - Network (*) check page 7 on how to recognize a suitable PCI card for your Sam460ex Video output The current U-Boot version supports video output from: - onboard SM502 VGA port...
Page 8
“PCI-E 1x / SATA-2” U-Boot menu. A reboot is required. 2 - the Sam460ex board is built to work standalone in a fanless enviroment but particular care must be taken when housing the board in a closed metalic cabinet with other electronic devices (such as hard drives, CD/DVD, DC-DC converter etc..)
Page 9
Frequently Asked Questions How to use more than one SATA drive? The Sam460ex is made both for embedded and consumer markets. It can be adapted to different needs. As an example, a customer who wants a board for home use will probably choose to add a SATA controller on a PCI card.
Need help?
Do you have a question about the Sam460ex and is the answer not in the manual?
Questions and answers