Page 1
MIXZ Low-Noise Dual Mixer with Tiptop Bus Mix User Manual OUT A MIXER B GAIN...
Page 3
This is done by sending the signal through the bus board and picking them up by the MIXZ. At this moment this manual is being written the modules that have Bus Mix are all of the Tiptop drum modules. You can decide which modules...
Page 4
Here is an example patch showing how versatile the MIXZ is. In this example the MIXZ mixes two Z3000 on Mixer A, going into the Z2040 to make a thick bass line. The output of the Z2040 then goes to Mixer B, Mixer B also takes in the HATS909, SD808 and CP909 from the Bus Mix, the mix of all those voices then goes into the Z-DSP for spatial processing using some stereo delay.
Page 5
Things important to know about Bus Mix If you have more than one MIXZ module in a row make sure that only one Bus Mix switch is turned on at a time. You can not mix Bus Mix signals on two or more MIXZ simultaneously.
Need help?
Do you have a question about the Mixz and is the answer not in the manual?
Questions and answers