connect with a USB cable
Use a USB cable to connect your
handset to a laptop, handheld device, or
desktop computer.
1 Pull out the connector cover, and insert
the charger into micro USB connector on
your phone as shown.
2 Insert the data plug into the data port of
the other device.
When used as a modem, your handset is
enabled for Packet Data transfer mode, which is
used for small file transfers such as email.
Note: To use these services, you must install
the iDEN Wireless Data Services software
(available separately). For more information on
setting up your computer and your handset
for packet and circuit data calls, contact your
service provider.
accessories
Your handset comes with a battery, and a
charger.
To order additional accessories, log on to our
Web site www.telusmobility.com or
contact your Mike Dealer.
for more information
If you have questions about your handset,
contact your Mike Dealer or TELUS Client
Care.
essentials
23