Do you have a question about the 500 Series and is the answer not in the manual?
Questions and answers
Johnson
April 10, 2025
i having issues with my lisa 500, showing me safety block turn unit off , which i did, if i turn it ON again it will still showing safety block, turn unit off
1 comments:
Mr. Anderson
April 10, 2025
If your Lisa 500 Series sterilizer is displaying a safety block message and will not turn on, check the following:
1. Ensure the main switch or network circuit breaker is turned ON. 2. Check that there is voltage at the socket. 3. Make sure the mains cable is properly connected.
If the problem persists after these checks, contact technical service.
Need help?
Do you have a question about the 500 Series and is the answer not in the manual?
Questions and answers
i having issues with my lisa 500, showing me safety block turn unit off , which i did, if i turn it ON again it will still showing safety block, turn unit off
If your Lisa 500 Series sterilizer is displaying a safety block message and will not turn on, check the following:
1. Ensure the main switch or network circuit breaker is turned ON.
2. Check that there is voltage at the socket.
3. Make sure the mains cable is properly connected.
If the problem persists after these checks, contact technical service.
This answer is automatically generated