Important Safety Instructions - Bosch DPH36652UC Installation Manual

Hide thumbs Also See for DPH36652UC:
Table of Contents

Advertisement

Available languages

Available languages

IMPORTANT SAFETY INSTRUCTIONS
Read All Instructions
Before Using the Appliance.
READ AND SAVE THESE INSTRUCTIONS
WARNING
TO REDUCE THE RISK OF FIRE,ELECTRIC
SHOCK, OR INJURY TO PERSONS,OBSERVE
THE FOLLOWING:
A. Use this unit only in the manner intended
bythe
manufacturer.
If you have questions,
contact
the manufacturer.
B. Before servicing or cleaning the unit, switch
power offat service panel and lock service
panel disconnecting
means to prevent power
from being switched on accidentally.
When the
service disconnecting
means cannot be locked,
securely fasten a prominent
warning device,
such as a tag, to the service panel.
C. Installation
Work and Electrical Wiring Must Be
Done By Qualified
Person(s)In
Accordance
With All Applicable
Codes & Standards,
Including
Fire-rated Construction.
D. Sufficient air is needed for proper combustion
and exhausting
of gases through
the flue
(chimney) of fuel burning equipment
to prevent
back-drafting.
Follow the heating equipment
manufacturers
guideline
and safety standards
such as those published
by the National Fire
Protection
Association
(NFPA), the American
Society for Heating, Refrigeration
and Air
Conditioning
Engineers (ASHRAE), and the
local code authorities.
E. When cutting
ordrilling
intowall
orceiling,
do
not damage electrical wiring and other hidden
utilities.
F. Ducted systems must always be vented to the
outdoors.
CAUTION
FOR GENERAL VENTILATING USE ONLY. DO
NOT USE TO EXHAUST HAZARDOUS OR
EXPLOSIVE MATERIALS OR VAPORS.
CAUTION
To reduce risk of fire and to properly exhaust
air, be sure to duct air outside - do not vent
exhaust air into spaces within walls, ceilings,
attics, crawl spaces, or garages.
WARNING
TO REDUCE THE RISK OF FIRE, USEONLY
METAL DUCT WORK.
Install this hood in accordance
with all
requirements
specified.
WARNING
To Reduce The Risk Of Fire Or Electric Shock,
Do Not Use This Hood With Any External Solid
State Speed Control Device.
OPERATION
a. Always leave safety grills and filters in place.
Without
these components,
operating
blowers
could catch onto hair, fingers and loose clothing.
The manufacturer
declines all responsibility
in the
event of failure to observe the instructions
given
here for installation,
maintenance
and suitable use
of the product. The manufacturer
further declines
all responsibility
for injury due to negligence
and
the warranty of the unit automatically
expires due to
improper
maintenance.
This unit is manufactured
for indoor use only. Do not use this unit outdoors.

Advertisement

Table of Contents
loading

This manual is also suitable for:

Dph30652uc

Table of Contents