Table of Contents
Advertisement
3. HARDWARE SETUP
3) Parallel Port Connector (Burgundy 25-pin PRINTER)
You can enable the parallel port and choose the IRQ through Onboard Parallel
Port in the BIOS.
NOTE: Serial printers must be connected to the serial port.
Parallel Port (25-pin Female)
4) Serial Port Connectors (Teal/Turquoise 9-pin COM1, 10-1 pin COM2)
Two serial ports are ready for a mouse or other serial devices. See Onboard
Serial Port 1/2 in the BIOS.
5) Universal Serial Bus Ports (Black two 4-pin USB)
Two USB ports are available for connecting USB devices. For additional USB
ports, you can use the USB headers (see USB Headers later in this section).
NOTE: USB Function in the BIOS must be Enabled to use these ports.
24
COM1 Serial Port (9-pin Male)
HP Alcatraz User's Manual
USB 1
USB 2
Advertisement
Table of Contents
