White and Brown DA 908 ETNA User Manual

HOW TO USE THE KETTLE HOW TO USE THE KETTLE
1. Remove the kettle from the base.
2. Depress the lid handle and lift the lid upwards, fill the kettle via
the spout.
3. Do not fill with less than 0.75 liters of water, this to prevent the
kettle from boiling dry.
4. After filling, ensure the lid is closed. Do not fill with more than
1.7 liters of water, to avoid water from spilling out during the
boiling process.
5. Plug the power supply cord from the base unit into the mains
power supply.
6. To switch on the appliance, push the ON/OFF switch. The
indicator lights up when the unit is switched on.
7. When the water has boiled, the kettle will automatically switch
off.
8. You can stop the boiling process at any time by pushing the
ON/OFF switch.
CLEANING CLEANING
• Before the first use, rinse the kettle, fill it with fresh water up to
the maximum level and let it operate.
• To remove troublesome stains, use a mild soap or detergent.
Avoid using abrasive cleaning agents.
• The filter must be cleaned regularly to allow a good flow of
water.
DESCALING DESCALING
• For normal use, descale the kettle at least twice a year.
• Fill the kettle up to MAX with a plastic kettle de-scaling solution
(available in most supermarkets and household suppliers) or
mixture : one part white vinegar and two parts water. Switch on
and wait for the kettle to switch off automatically and allow it to
stand for 30 seconds.
• Re-boil the mixture and allow it to stand for a further one hour.
• Pour the mixture away and fill the kettle with clean water up to
MAX and boil again.
• Pour away this boiled water to remove any remaining scale and
vinegar.
8
Bouilloir e sans fil
Bouilloir e sans fil
Cor dless Kettle
Cor dless Kettle
DA 908, DA 912 "ETNA"
MODE D'EMPLOI
MODE D'EMPLOI
USER MANUAL
USER MANUAL