Erasing Tracks - Williams Piano Classic Cantabile SP-4X User Manual

Erasing Tracks

TO ERASE THE MUSIC RECORDED ON TRACK 1/2/3
1. Press the USER SONG button to select the song you want to erase.
Each time you press the USER SONG button, the LED above the user
song button will indicate which is selected. Also, the LCD display will
show the user song number.
2. Press and Hold the REC button down.
3. Press the TRACK button that you which to erase while you continue to
hold down the REC button. This will immediately erase the existing
data from your previous recording.
4. Release the REC button (the track LED is blinking).
5. Press the TRACK button again (the track LED will go off).
6. Repeat Steps 2 through 5 until all the tracks that you desire are erased.
7. When the track has been properly erased, its track button LED will not turn
on when the USER SONG button is pressed. This indicates that there is no
recorded information on this track.
25