OPERATING MANUAL AND USER GUIDE Important Safety Instructions Read these instructions – All the safety and operating instructions should be read before this product is operated. 2. Keep these instructions – The safety and operating 13. Unplug the apparatus during lightning storms or when instructions should be retained for future reference.
These limits are set by various countries safety approvals committees, and we at Albion Musical Instruments Important Warnings design, build, test, and have approved our products to ETL etc.
DON’T want from a tube! Thank you A word about the EQ system used on the Albion TCT range of amps. Although the tone controls are based on the time honoured interactive passive system historically used on most guitar amps, our design is somewhat wider ranging than most others.
Page 7
Closed loop gives a much tighter modern response to the sound and feel. The output section can also be run at 33% (approx 12 The TCT35C combo comes complete with one of our own designed and built Albion G1270C 16ohm 12” loudspeakers.
OPERATING MANUAL AND USER GUIDE TCT 35 Features and Controls INPUT at zero setting! As with the GAIN control, low settings are –Mono !” Jack socket for instrument input. Use a 8ohm cleaner – mid settings are crunchier – and high settings properly screened “guitar”...
DO NOT CONNECT ANY UNBALANCED GROUND CONNECTED EQUIPMENT TO THE OUTPUT OF THIS AMPLIFIER. USE UN-GROUNDED DIFFERENTIAL entire signal is sent and returned back to the amplifier. FOOTSWITCH CONNECTOR – MODE ONLY. IF IN DOUBT REFER TO USER MANUAL the supplied Albion BYPASS LOOP HIGH 16ohm...
Page 10
OPERATING MANUAL AND USER GUIDE The TCT35C 1 x 12” combo is fitted with a 16 ohm loudspeaker. Most Albion guitar loudspeaker cabinets are also 16 ohm. 250V rated 20mm glass fuse HT FUSE – rated 20mm glass fuse damage in the case of one of the 6L6 output valves having a failure.
Need help?
Do you have a question about the TCT 35 and is the answer not in the manual?
Questions and answers