1. Manuals
  2. Brands
  3. Water Factory Systems Manuals
  4. Water Dispenser
  5. CoolerMATE CMTRO-75
  6. Owner's manual

Water Factory Systems CoolerMATE CMTRO-75 Owner's Manual

Reverse osmosis systems
Hide thumbs
1
2
3
4
5
6
7
8
Table of Contents

Advertisement

Quick Links

Download this manual
Installer: Please leave this manual with owner/operator.
End User: Please retain for operation and future maintenance instructions.
INSTR6064 1209
™
Owner's Manual
This Manual is for the Installation, Operation,
and Maintenance of the
WATER FACTORY SYSTEMS
CoolerMATE
Reverse Osmosis Systems
Model CMTRO-75
System tested and certified by NSF International against
NSF/ANSI Standard 42 and Standard 58 for the claims
specified on the Performance Data Sheet.
™
™
™
.
.

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the CoolerMATE CMTRO-75 and is the answer not in the manual?

Questions and answers

Summary of Contents for Water Factory Systems CoolerMATE CMTRO-75

  • Page 1 ™ ™ Owner's Manual This Manual is for the Installation, Operation, and Maintenance of the WATER FACTORY SYSTEMS ™ CoolerMATE ™ Reverse Osmosis Systems Model CMTRO-75 System tested and certified by NSF International against NSF/ANSI Standard 42 and Standard 58 for the claims specified on the Performance Data Sheet.

  • Page 2: Safety Information

    SAFETY INFORMATION Read, understand, and follow all safety information contained in these instructions prior to installation and use of the CMTRO-75™ Reverse Osmosis (RO) Drinking Water System. Retain these instructions for future reference. Intended use: The CMTRO-75 Reverse Osmosis (RO) Drinking Water System is intended for use in fi ltering potable water in the home or offi ce and has not been evaluated for other uses.
  • Page 3 ™ CMTRO - 75 RO System Diagram Before beginning the installation, spend a few minutes studying the drawing below. To Cooler Tank (3/8” Blue Polyethylene Tubing) Product Water Outlet Fitting Feedwater Inlet Filter Icon 1/4" Orange Polyethylene Tubing Ty-Rap (Used to fasten tubing to cooler) Filter Icon Bayonet Filter...

  • Page 4: Installation Requirements

    I. Installation Requirements CMTRO-75 ™ RO system, Model CMTRO-75 can be used with most coolers that include a storage tank. Check the guidelines below to confirm that the CMTRO-75 system you have selected is the correct system for your water conditions and water quality requirements.
  • Page 5 ‘Push-In’ Tubing Connector This product is outfitted with user friendly ‘Push-In’ connectors. Proper use of the connectors is shown in the diagrams below. It is most important that the tubing selected for use with these connectors be of high quality, exact size and roundness, and with no surface nicks or scratches.

  • Page 6: Important Notes

    7. Reconnect the 3/8” yellow tubing to the back of the filtration assembly. Reconnect the 1/4” orange tubing to the feed water fitting on the filtration assembly. IMPORTANT NOTES • If you encounter diffi culty in removing the tubing from the tank, make sure the tank valve is closed and then cut the yellow tubing approxi- mately 1”...
  • Page 7 How to Replace the Prefilter and Postfilter Cartridges 1. Close the feed water valve and tank valve, then partially drain the cooler reservoir. Wait five (5) minutes for the assembly to completely depressurize. 2. Twist the filter cartridge 1/4 turn to the left so that the ears on the cartridge are able to disengage from the head. Firmly pull the cartridge from the head.
  • Page 8 3M company CUNO Incorporated CUNO, CMTRO-75 and Water Factory Systems are 400 Research Parkway trademarks of 3M Company used under license. Meriden, CT 06450 USA NSF is a trademark of NSF International. Toll Free 1-800-733-1199 Worldwide 1-203-237-5541 Fax 1-203-238-8701 www.waterfactorysystems.com •...

Table of Contents