Battery; Battery Charging - Fujitsu LifeBook S-4530 Instructions Manual

SECTION 1

7. Battery

Battery Charging

For portability, this computer can operate either from the AC adaptor or from its battery. This
item explains how to charge the battery.
1 Connect the AC adaptor.
2
3
First connect the AC power cord to the AC
adaptor (1), next connect the other cord of
the AC adaptor to the personal computer's
DC-IN connector (2). Lastly, plug the AC
power cord into an AC outlet (3).
Relationship between computer modes and battery charging time
Main switch
ON
OFF
Critical Point
When the battery charging indicator (
at the leftmost end changes its mode from blinking (
( ), charging the battery is complete.
Spend a considerable time for charging the battery so that it is charged to the full.
If the ambient temperature is too low, the battery declines in its charging performance.
If the battery is charged just after it was used, charging may result in failure because the
battery temperature has risen and the battery protection function is activated. In such the
case, let the battery remaining in the charging status and charging will start as the battery
temperature drops.
24
AC adaptor
1
Computer mode
Operating mode
Suspend mode
Stopped
2 is displayed.
During charging,
status indicator LCD and the remaining battery
charge is displayed.
Charging mode
Standard charging
Quick charge
) goes out and the remaining battery charge indicator
is displayed on the
Charging time
About 10 hours
About 4 hours
) to continuous lighting