Contents Introduction Before use Accessories Quick start guide Features description Specifications Others...
Page 5
Congratulations! Thanks for purchasing the Samba S Bass 2.1 System. We are sure that you will enjoy all kinds of music from our inspired quality product. Designed and engineered by well credited team of experts, Lars&Ivan products assure to provide the best audio quality products to our customers.
Before Use 1. Do not locate in the following places To ensure long-lasting use, do not locate the Samba S Bass System where: exposed to direct sunlight, near to sources of heat such as heaters, highly humid or poorly ventilated, dusty, subjected to mechanical vibrations, on wobbly, inclined or otherwise unstable surfaces,...
Quick start guide To audio source in/computer Volume controller S Bass Subwoofer To power Power adapter Samba right satellite speaker Samba left satellite speaker...
Features description S Bass subwoofer switch. On/OFF : connects with power adapter. POWEr InPUT : connects with Samba speaker. rIghT OUTPUT : connects with Samba speaker. LEFT OUTPUT jack: accepts input signals from AUDIO In music medium. knob: adjusts the bass output level. VOLUmE 3 4 5 Turn clockwise to increase the volume.
Specification Samba satellite speaker 10 W rmS output. ThD < 0.2 % @ 1 W. Frequency response: 110 hz ~ 22 khz. Sensivity ratio: 80 dB. Driver units: markaudio. Dimensions (h x W x D ): 112 x 123 x 121 mm. Weight: 1.2 Kg / pair.
Others This section describes the care and maintenance tasks that must be performed to optimize the operation of your Lars&Ivan component. Cleaning of equipment external surfaces The exterior finish of your unit will last indefinitely with proper care and cleaning. never use scouring pads, steel wool, scourging powders or harsh chemical agents (e.g., dye solution), alcohol, thinner, benzine, insecticide or other volatile substances as these will affect the finish of the equipment.