Using Two Subwoofers - Yamaha YST-SW800 Owner's Manual

Using two subwoofers

Right main speaker
/MONO
INPUT
2
Subwoofer
BASS PHASE AUTO OUTPUT
STANDBY /MONO TO SPEAKERS
MUSIC MOVIE REV NORM HIGH OFF
LOW
FROM AMPLIFIER
INPUT INPUT
2 1
To AC outlet
Notes
● Some amplifiers have line output terminals labeled PRE OUT.
When you connect the subwoofer to the PRE OUT terminals of
the amplifier, make sure that the amplifier has at least two sets
of PRE OUT terminals. If the amplifier has only one set of
PRE OUT terminals, do not connect the subwoofer to the PRE
OUT terminals. Instead, connect the subwoofer to the speaker
output terminals of the amplifier. (Refer to pages 6 and 7.)
OUTPUT
TO SPEAKERS
FROM AMPLIFIER
INPUT
1
Subwoofer
BASS PHASE AUTO OUTPUT
STANDBY /MONO TO SPEAKERS
MUSIC MOVIE REV NORM HIGH OFF
LOW
FROM AMPLIFIER
INPUT INPUT
2 1
POWER
ON
OFF
To AC outlet
OUTPUT
/MONO
TO SPEAKERS
FROM AMPLIFIER
INPUT INPUT
2 1
SPLIT SUBWOOFER
POWER
ON
OFF
● When connecting to a monaural line output terminal of the
amplifier, connect the L/MONO INPUT2 terminal.
● When connecting to line output terminals of the amplifier,
other speakers should not be connected to the OUTPUT
terminals on the rear panel of the subwoofer. If connected,
they will not produce sound.
Left main speaker
Amplifier
5
E-