Table of Contents
Advertisement
Follow these steps to customize a brightness setting to one of the
brightness levels:
• Select the brightness setting you want to customize.
• Double-click, press and hold.
current brightness level for 1 second and then begin to scroll up
through the brightness levels pausing two seconds at each level.
When your flashlight reaches the maximum brightness level, it will
double blink and pause for 3 seconds. Each light show level is
then displayed for 4 seconds.
brightness level, your flashlight will again double-blink and pause
for 3 seconds before continuing through the regular brightness
levels.
• Note: the scrolling direction reverses each time you invoke the
double-click, press and hold command. If the scrolling direction is
not the desired direction, release the button and repeat the double-
click, press and hold command to scroll in the opposite direction.
• Release the button when you reach the brightness level you want.
• Turn off your flashlight to save the customized setting.
• Note: switch to a different setting prior to turning off your flashlight
to undo the customization. For example, press-hold-release will
momentarily switch to the Strobe setting and then back to your
selected setting and undo your customization.
• Note: your flashlight will turn off with 10 very rapid flashes if there
is insufficient power to memorize the setting.
12. Customizing Features Using the Option Menu
Your flashlight offers the following features through the Option Menu:
1. Force Setting – indicated by a <long flash>
2. Button Lock – indicated by <three rapid flashes>
3. Automatic Turn Off – indicated by a <bright-to-dim> sequence
4. Locator Flash – indicated by a <dim flash>
5. Momentary – indicated by a <long-short flash> sequence
6. Customization – indicated by a <dim-to-bright> sequence
Your flashlight will pause at the
Upon reaching the minimum
10
Advertisement
Table of Contents
