Connecting Copper Cable - Cables to Go 10/100Base-TX Operation Manual

10/100Base-TX to 100Base-FX Mini Converter

Connecting Copper Cable

The 10/100BASE-TX RJ-45 Ethernet port fully
supports auto-sensing and auto-negotiation.
1. Insert one end of a Category 3/4/5/5e type twisted
pair cable into an available RJ-45 port on the
Converter and the other end into the port of the
network node.
2. Check the corresponding port LED on the
Converter to be sure that the connection is valid.
(Refer to LED chart in next section)
- 13 -