Download Print this page

VHT Special 12 User Manual page 3

12-20 watt hand-wired vacuum tube guitar amplifier
Hide thumbs Also See for Special 12:

Advertisement

IMPORTANT SAFETY INSTRUCTIONS
1) Read these instructions.
2) Keep these instructions.
3) Heed all warnings.
4) Follow all instructions.
5) Do not use this amplifier near water.
6) Clean only with dry cloth.
7) Do not block any ventilation openings. Install in accordance with the manufacturer's instructions.
8) Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.
9) Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A
grounding type plug has two blades and a third grounding prong. The wide blade or the third prong are provided for your safety. If the provided
plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet.
10) Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from
the amplifier.
12) Unplug this amplifier during lightning storms or when unused for long periods of time.
13) Refer all servicing to qualified service personnel. Servicing is required when the amplifier has been damaged in any way, such as power-
supply cord or plug is damaged, liquid has been spilled or objects have fallen into the amplifier, the amplifier has been exposed to rain or
moisture, does not operate normally, or has been dropped.
14) The amplifier shall not be exposed to dripping or splashing and no objects filled with liquids, shall be placed on the amplifier.
15) This amplifier shall be connected to a mains socket outlet with a protective earthing/ground connection.
16) The mains/power plug or amplifier coupler is the disconnect device which must remain readily operable.
WARNING To reduce the risk of fire or electric shock, do not expose this amplifier to rain or moisture.
1
VHT SPECIAL 12/20
The Pedal-Friendly Amp with Selectable Power Ranges
Building on the success of the popular VHT Special 6 and Special 6 Ultra, the VHT Special 12/20 features increased power (with two power
ranges), a unique preamp specifically designed to excel with pedals and multi-effects units, a convenient built-in 9-volt DC pedal power supply,
an all-tube buffered effects loop with send and return level controls, variable Watts control, plus VHT's unique Depth and Texture controls.
To optimize the amp for a wide range of output tubes, the VHT Special 12/20 offers two output-power ranges; safely located behind the rear
panel, a special voltage range switch provides the proper voltages for 6V6 or EL84 output tubes (in 12-watt low-voltage/low-power mode). The
high voltage 20-watt setting provides the ideal voltages for higher-power 6L6 or EL34 output tubes. The Special 12/20 ships from the factory
with a pair of 6V6 output tubes (VHT 6V6-to-EL84 socket adapters are required for operation with EL84 tubes). In addition, the Special 12/20's
variable Watts control can reduce the maximum output power to less than one watt for whisper-quiet volume levels.
The Special 12/20 preamp was designed to bring the most out of every effects pedal and multi-effects unit with enhanced clarity, detail, and
controlled tube compression. Its low-impedance buffered effects loop send — with variable send level — can effortlessly drive the most difficult
pedals without tone or signal loss. Thanks to its variable send and return level controls, the 12/20's effects loop can accommodate a wide
range of pedal or rack effects. Those seeking the shortest signal path to the output stage can plug their pedals or multi-effects units directly
into to effects return jack — the 12/20's unique output stage Depth and Texture controls are post-effects loop, so the output stage characteris-
tics can always be fine-tuned to accommodate a wide range of instruments, speakers, playing styles and environments.
As an added convenience for pedal users, the VHT Special 12/20 also features a built-in, regulated 9-volt DC pedal power supply.
Hear your pedals like never before — with the VHT Special 12/20.
2

Advertisement

loading

Related Products for VHT Special 12

This manual is also suitable for:

Special 20