Table of Contents
Advertisement
BATTERY INSTALLATION
Vehicle
Requires 4 AA Alkaline Batteries (not included)
1.
There is a screw in the center of
the battery latch. Loosen the
screw with a phillips head
screw driver.
2.
While holding the battery
compartment lid, pull up on
the latch and turn it either
counter clockwise or clockwise
so that the battery compartment
lid can be removed.
3.
Insert 4 AA batteries, making sure to follow the battery
polarity (+ and -) indicators on product.
4.
Replace the battery cover.
5.
Turn the Power Switch to the ON position and the
Controller
Requires one 9v Battery (included)
1.
Remove the battery cover as shown.
2.
Insert one 9V battery, making sure
to match the polarity (+ and -) as
shown inside the battery
compartment.
3.
Replace the battery cover.
4.
Turn the transmitter ON.
The red indicator light on the
controller will turn on.
ash.
3
Advertisement
Table of Contents
