COMBINATION LABORATORY FITTINGS Thank you for selecting American-Standard...the benchmark of fine quality for over 100 years. To ensure that your installation proceeds smoothly--please read these instructions carefully before you begin. 7272.821 ROUGHING-IN DIMENSIONS 7272.820 3 ˚ /8" 7/8"DIA [22mm] /4" DIA.
Page 2
TOOLS AND SUPPLIES REQUIRED Channel Locks INSTALL DECK MOUNT LABORATORY FITTINGS CAUTION Turn off hot and cold water supplies before beginning. Drill two 1-1/8" dia. holes in mounting surface if required per rough-in dimensions. Assemble rubber washers onto fitting shanks. Insert fitting shanks through holes of mounting surface.