Table of Contents
Advertisement
Troubleshooting
How do I reset my player?
Insert a small pin or other sharp object into the reset hole located at the bottom of the player.
Hold until the player shuts down.
If none of the above works, then you may have to use the Device
Manager to recover your player:
1
Launch the Philips device Manager at Start > Programs > Philips digital Audio Player
> SA53XX > Philips SA53XX device Manager on your PC.
2
Turn off your player.
3
Press and hold the
connecting to the PC.
4
Keep holding the key until the Philips device Manager acknowledges your player and goes
into recovery mode.
5
Click the Repair button and follow the instructions given by the device Manager.
6
After the player has been repaired, disconnect it from your PC and re-start.
OPTIONS
button and the
button simultaneously while your player is
11
Advertisement
Table of Contents
