Handsfree And Headset Dialing; Memory Dialling - Gemini CLI 9335 Operating Instructions Manual

Handsfree and Headset dialing

Press the Handsfree / Headset button firmly and dial tone will be heard in
the speaker.
Dial the required number on the keypad.
When the called party answers the phone, continue to speak using
microphone in the telephone or pick up the Handset. While the Handset is in
use it is possible to revert to speakerphone by pressing the Handsfree
button BEFORE replacing the Handset.
Note: if using the Handset and the Handsfree button is pressed to revert to
speakerphone operation, both the Handset and the speakerphone
microphones are muted until the Handset is replaced.
The call is terminated by replacing the Handset on the cradle or by pressing
the Handsfree / Headset button.
The telephone will continue to ring an unanswered number until the call is
terminated by pressing the Handsfree / Headset button.
When the Headset is connected, the Handsfree function is disabled to allow the
Headset / Handsfree button to work in Headset mode.
Press the Handsfree / Headset button firmly and dial out tone will be heard in the
Headset. Dial the required number on the keypad.

Memory dialling

Many of the memory dialling functions are very similar but to ease understanding,
they are dealt with separately in this section.
28