Advertisement
Quick Links
Quick Start Guide
GUVCD2800 Integrated Digital TV
Install remote
control batteries
The message below will be displayed.
Press SELECT to start the search
for digital TV channels
The search progression will be
displayed as shown below.
Connect the aerial lead.
Once the search for digital
TV channels is complete the
message below will be
displayed. Press SELECT.
When the warning message
is displayed press
to highlight CONTINUE
and press SELECT.
Plug in to the
mains supply
and switch on
the mains
socket.
Press the Power On/
Off button on the
Power On/Off
front of the TV.
The search progression will be
displayed as shown below.
Once the search is complete the
PROGRAM list will be briefly
displayed and the TV will tune to the
first channel found.
Press any of the
numeric buttons,
P+ or P- to switch
the TV on.
To switch between
analogue and digital
TV channels press
the TV/DTV button.
Refer to the manual
for detailed operating
information.
Helpline: 0870 920 1101
Advertisement
Subscribe to Our Youtube Channel
Related Manuals for Grundig GUVCD2800
Summary of Contents for Grundig GUVCD2800
- Page 1 Quick Start Guide GUVCD2800 Integrated Digital TV Install remote Connect the aerial lead. control batteries The message below will be displayed. Press SELECT to start the search for digital TV channels The search progression will be displayed as shown below.
- Page 2 Connection Diagram This diagram shows a typical configuration with a recording device such as a DVD recorder or a video cassette recorder. Refer to the manual for how to set the EXT2 output to the digital TV channels so that they can be recorded.
Need help?
Do you have a question about the GUVCD2800 and is the answer not in the manual?
Questions and answers