Mackie frs 1700 Specifications

FRS•1700 and FRS•2800
Mackie FRS Series Power Amplifiers provide the power
and performance needed to keep the show rolling night after
night. With proven Fast Recovery
deliver clear, punchy sound that's undistorted, even when
pushed to the limits.
The designs are extremely rugged, but are still easy to
lift thanks to lightweight and ultra-efficient high-current
switching power supplies. With optimized performance,
super-quiet operation and an array of protection circuits,
FRS Series Power Amplifiers are the obvious choice to drive
your passive loudspeaker system.
The amplifier can operate in stereo, dual-mono, or
bridged-mono. The output connections are NL4 and binding
posts for left, right, and bridged mono.
The combination inputs are capable of accepting
balanced XLR, 1/4" TRS, or unbalanced 1/4" TS connections
from line-level sources. Two XLR thru-outputs allow sharing
the balanced input signals with other amplifiers or powered
speakers. Two front panel level controls allow adjustment of
the input signals.
The front panel has a rocker-style power switch with
a power LED, and each channel has a high-resolution
six-segment LED meter.
The amplifier output stage is fully protected against
permanent damage caused by overloading, shorts and
extreme temperatures.
The front panel incorporates holes for rack mounting
where it will take up two rack spaces. Two handles are
fitted on the front panel for easy transporting.
The FRS Series Power Amplifiers are designed for
continuous duty in speech, music and sound reinforcement
applications in churches, schools, offices, arenas, hotel
meeting rooms, convention centers, recreation facilities
and other venues demanding high performance, flexible
features and rugged dependability.
Available in two powerful models: FRS•1700 and FRS•2800
FRS•1700 / FRS•2800
technology, FRS amplifiers
™

FEATURES:

Fast Recovery circuitry for clean, undistorted sound
■
™
Ultra-lightweight switching power supply for
■
maximum efficiency and minimal heat
Available in two powerful models:
■
• FRS•1700 – 1660W continuous power @ 4 bridged
• FRS•2800 – 2800W continuous power @ 4 bridged
Selectable mono/stereo/bridged operating modes
■
High-resolution, 6-segment LED meter per channel
■
Defeatable clip limiter plus short, under-impedance,
■
over-current and thermal protection
30 Hz subsonic filter maximizes amplifier efficiency
■
and headroom
Combo XLR/TRS input and XLR thru connectors
■
per channel
NL4 and binding post outputs per channel
■
Third NL4 output for bridged mono applications,
■
also provides both output channels on a single
connector (mono / stereo modes)
Multi-speed fans adjust to operating temperature
■
for minimal acoustic noise
Robust, impact-resistant, all-steel 2U rackmount chassis
■
Lightweight and portable – both models under 22 lb
■
1700W / 2800W
Power Amplifiers
1/5 PAGES