Headphone Jack - Brookstone Universal Dock Instructions Manual

leFt aND rIgHt rCa OUtPUt JaCkS
1 . If you are not using battery power, insert one end of the TRANSMITTER DOCK
POWER ADAPTER into DC 9V on the transmitter, and the other end into an
electrical outlet .
2 . Insert one end of the DUAL RCA CABLE into the appropriately colored R/L
LINE IN 1 jacks on the transmitter, and the other end into your audio source's
left and right audio output jacks .
Note: Do not connect the DUal rCa CaBle to speaker terminals on your
tV or audio source. this may damage the transmitter, your tV or audio source.

HeaDPHONe JaCk

1 . If you are not using battery power, insert one end of the TRANSMITTER DOCK
POWER ADAPTER into DC 9V on the transmitter and the other end into
an electrical outlet .
2 . Insert one end of the 3 . 5 MM RIGHT ANGLE CABLE into the 3 . 5 MM LINE IN
2 jack on the TRANSMITTER DOCK and the other end into your audio source
headphone jack .
Note: Inserting a plug into the 3.5mm lINe IN jack automatically mutes
the r/l lINe input source.
Note: If your audio source requires a ¼" headphone plug, you will need
a ¼" adapter (not included).
10