If there is no sound when using the Targus drive, check that:
• The disc you are using is an audio disc or supplies audio output.
• The headphones/speakers are correctly connected.
• The cable is in good condition.
• The volume is turned up.
• The audio software is installed.
Changing the Drive Letter Assignment
The following steps describe how to change the drive letter for the Targus drive under the
®
Windows
Me operating system.
1 Click Start, Settings, and then Control Panel.
2 Click System and select the Device Manager tab.
3 Click either DVD-ROM or Drive, then Targus drive.
4 Click Properties, then Settings.
The current drive letter assignment and the reserved drive letters appear.
5 Under "Reserved Drive Letter" type the letter you want to represent the Targus drive and
click OK.
6 For the changes to take effect, restart your computer.
Writing and Rewriting Problems
If the Targus drive is not writing or rewriting data properly, try the following:
• Reduce the write/rewrite speed.
• Disable all Advanced Power Management (APM) functions.
• Remove or disable all Terminate and Stay Resident (TSR) programs, such as your anti-
virus program.
• Defragment your hard disk drive.
USB 2.0 Rewriteable DVD+/-RW Slim External Drive
11