Kurzweil Artis Musician's Manual page 113

Controller Controller
Number Destination
0 OFF/Bank
1 MWheel
2 Breath
3 MIDI 03
4 Foot
5 PortTim
6 Data
7 Volume
8 Balance
9 MIDI 09
10 Pan
11 Express
12 MIDI 12
13 MIDI 13
14-21 MIDI 14-21
22 MIDI 22
23 MIDI 23
24 MIDI 24
25 MIDI 25
26 MIDI 26
27 MIDI 27
28 MIDI 28
29 MIDI 29
30-31 MIDI 30-31
32 MIDI Bank
33–63 MIDI 33–63
64 Sustain
65 MIDI 65
66 Sostenuto
67 Soft
68 Legato
By default, when you enter 0 or Clear for the Destination parameter, the
destination will be assigned to OFF. To select Bank as the destination, use
the Value buttons.
Default destination for the Modulation Wheel
Default assignment for breath controller in compatible synths
MIDI Controller 3
Default assignment for continuous foot controller in compatible synths
Monophonic Artis Programs respond to this Controller if portamento is
turned on.
MIDI Controller 6
MIDI Volume
MIDI Balance
MIDI Controller 9
MIDI Pan
Default assignment for CC Pedal. In most Programs it acts as a volume
control. It scales between 0 and the current value of Volume.
Default assignment for Slider A
Default assignment for Slider B
MIDI Controllers 14-21
Default assignment for Slider C
Default assignment for Slider D
Default assignment for Slider E
Default assignment for Slider F
Default assignment for Slider G
Default assignment for Slider H
Default assignment for Slider I
Default assignment for Variation switch
MIDI Controllers 30–31
MIDI Bank change message
MIDI Controllers 33–63
Default destination for Sustain Pedal
Default destination for Sostenuto Pedal (Sustains notes that are currently
down, but not notes played subsequently.)
Lowers the volume by a preset amount and may soften the timbre as well.
Forces mono playback.
Description
Multi Edit Mode
Zone파라미터
97