1. Manuals
  2. Brands
  3. Dubaco Manuals
  4. Barcode Reader
  5. DS-800BT
  6. User manual

Dubaco DS-800BT User Manual

Pocket-size wireless scanner
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
DS-800(BT)
Pocket-size Wireless Scanner
User's Manual

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the DS-800BT and is the answer not in the manual?

Questions and answers

Related Manuals for Dubaco DS-800BT

Summary of Contents for Dubaco DS-800BT

  • Page 1 DS-800(BT) Pocket-size Wireless Scanner User’s Manual...

  • Page 2: Table Of Contents

    Table of Contents Memory Mode ---------------------------------------------------------------------------3 Transmission Delay--------------------------------------------------------------------25 BT Local name---------------------------------------------------------------------------3 System Control------------------------------------------------------------------------26 Bluetooth mode configuration------------------------------------------------------4 Trigger Mode-------------------- -------------------------------------------------------28 Remote Mac Address------------------------------------------------------------------5 Buzzer----------------- -------------------------------------------------------------------29 Pin Code-----------------------------------------------------------------------------------5 Beep Volume-----------------------------------------------------------------------------29 Bluetooth parameter configuration by software-----------------------------6 Beep Tone-------------------------------------------------- ------------------------------30 USB-HID / USB-COM Mode----------------------------------------------------------6 Beep Time -------------------------------------------------------------------------------31 Memory Mode Setting-----------------------------------------------------------------7 Standby Time---------------------------------------------------------------------------32...
  • Page 3 Industrial 2 of 5----- -------------------------------------------------------------------57 Truncate Leading ---------------------------------------------------------------------86 Matrix 2 of 5---- ------------------------------------------------------------------------58 Truncate Ending-----------------------------------------------------------------------89 Code 93------ -------------------- -------------------------------------------------------59 Insert 0 Position---------------- ------------------------------------------------------92 Code 11-- ------------ -------------------------------------------------------------------60 Insert 1 Position -----------------------------------------------------------------------95 MSI / Plessey---------------------------------------------------------------------------61 Insert 0 Data----- -----------------------------------------------------------------------98 UK / Plessey --------------------------------------------- -----------------------------62 Insert 1 Data -------------------------------------------- ------------------------------101 Telepen-----------------------------------------------------------------------------------63 Hexadecimal / Decimal Table----------------------------------------------------104...

  • Page 4: Memory Mode

    Enter Bluetooth mode configuration Memory Mode Switch from Bluetooth to Memory Mode Mode Connect the USB cable between scanner and PC, and scan the below “Send” barcode. Send Slave Mode : Third party Bluetooth devices ( Mode:0) Clear all barcode data in the memory Master Mode - Third party Bluetooth devices (Mode:1) Clear Econnect Bluetooth dongle Mode I (Mode:2)

  • Page 5: Remote Mac Address

    Remote Mac Address Bluetooth parameter configuration by software Set Remote Mac Address to 00126F006EAA Connect scanner with PC by USB cable, and A. Scan “BT Module Enter” barcode Enter Enter set the scanner to ISP mode. B. Scan “Remote Mac Address” barcode Scan the below barcodes step by step to set the C.

  • Page 6: Memory Mode Setting

    Enter Memory Mode Setting Header Transmission Good Read Vibrator Disabel *Disabel *Enabel Enabel Date & Time Transmission Time Format Disabel *hh：mm：ss hh：mm *Enabel Reject Same *Disabel Enabel Good Read Beep Disabel *Enabel...

  • Page 7: Ext Transmission Delay

    Enter Ext Transmission Delay Date Format This configuration enables the delay time (time gap) setting in between each barcode data sending to PC. (1) Enter *yyyy/mm/dd (2) Ext Transmission Delay barcode mm/dd/yyyy (3) Scan parameters from Hexadecimal / Decimal table yy/mm/dd (Range:0~250 = 0~2.5sec) (4) OK...

  • Page 8: Standby Time

    Standby Time Bluetooth Mode Setting This configuration enables the time configuration for the main power BT List switching off after scanner LED turned off. User can simply understand their Bluetooth (1) Enter Enter parameter setting by scanning the following barcode, and use the notepad to receive the (2) Standby Time barcode Bluetooth parameter configuration data.

  • Page 9: Connect Off Time

    Enter Connect Off Time Good Read Beep Under the Bluetooth mode, when the Bluetooth connection is established while the scanner is not working. This configuration enables to set the duration of scanner sleep time. (Note: Default value is 6 as *Enabel 60 seconds) (1) Enter...

  • Page 10: Timeout

    Enter Timeout The timeout setting for the handshaking acknowledgment from the host Date Format PC, if scanner did not receive acknowledgement from the host PC, the warning sound will be active. This function is particular useful for some *yyyy/mm/dd applications which host PC takes longer response time. (1) Enter mm/dd/yyyy (2) Timeout barcode...

  • Page 11: Grneral Configuration Setting

    Enter Grneral Configuration Setting Transmission Gap Factory Default This is the delay time setting between each barcode data characters. If the delay time setting is too high, the application program may not be able to receive all the barcode data characters due to transmission Version speed.

  • Page 12: Transmission Delay

    Transmission Delay Timeout The delay time settings between the barcode data output, this enables The timeout setting for the handshaking acknowledgment from host PC, the user to set the output timing between each barcode data scanned. if scanner did not receive acknowledgement from the host PC, the warning sound will be active.

  • Page 13: Keyboard Layout Setting

    Enter Enter Keyboard Layout Setting Bluetooth HID Dongle Keyboard Layout Setting...

  • Page 14: Virtual Com Type

    Enter Virtual Com Type Timeout Transmission Gap The timeout setting for the handshaking acknowledgment from host PC, This is the delay time setting between each barcode data characters. If if scanner did not receive acknowledgement from the host PC, the the delay time setting is too high, the application program may not be warning sound will be active.

  • Page 15: Transmission Delay

    Enter System Control Transmission Delay Power On Music The delay time settings between the barcode data output, this enables *Enabel the user to set the output timing between each barcode data scanned. (1) Enter Disabel (2) Transmission Delay barcode Good Read Beep (3) Scan parameters from Hexadecimal / *Enabel Decimal table...

  • Page 16: Trigger Mode

    Enter Enter Trigger Mode Force Caes Good Read Off This configuration enables to convert all output digits to be same printing-case; even one *None barcode may have two kinds of case Momentary Inverse Alternate Lowercase Uppercase Timeout Off Transmission Code ID When scanning the barcode, User might want to know the symbology of the barcode ID, This Enabel...

  • Page 17: Buzzer

    Buzzer Beep Volume Beep Tone Beep Tone configuration enables to configure the frequency of beep Beep volume configuration enables to configure the volume of the Beep sound. sound (1) Enter (1) Enter (2) Beep Volume barcode (2) Beep Tone barcode (3) Scan parameters from Hexadecimal / (3) Scan parameters from Hexadecimal / Decimal table...

  • Page 18: Beep Time

    Standby Time Beep Time Beep time configuration enables to configure the duration of the beep This function enables to set the duration time to turn off the main sound. power of the scanner after scanning LED turns off. (1) Enter (1) Enter (2) Beep Time barcode (2) Standby Time barcode...

  • Page 19: Led Off Delay

    LED OFF Delay LAMP OFF Delay When the barcode is successfully read and decoded, The Green LED This enables to configure the duration time for scanning LED power off, indicator will be shown; user can configure the duration time for LED the scanning LED will automatically turn off if duration time elapsed.

  • Page 20: Good Read Time

    Good Read Time Setup Timeout This enables to set the scanning duration time for reading the same This configuration enables to set the duration of scanner configuration barcode label, this function only available when the trigger mode is set in time.

  • Page 21: Vibrator Off Delay

    Double Confirm Vibrator OFF Delay This option enables the scanner to double confirm the barcode data, if This configuration enables to set the duration of vibrating time when the this option is enabled, the scanner will require more times to verify the barcode is successfully read and decoded.

  • Page 22: Global Min./ Max. Length

    Global Min./ Max. Length Global Min. Length Global Max. Length This function enables to set the minimum barcode length, if the barcode This function enables to set the maximum barcode length, if the barcode length is less than configured Min. length, the barcode will not be length is greater than configured maximum length, the barcode will not decoded.

  • Page 23: Set Data & Time

    Enter Set Data & Time Symbology Settings UPC-A This function is to set the scanner time stamp, the default format is Read (YYMMDDHHMM) *Enabel (1) Enter Disable (2) Set Data & time barcode Add – on Type *None (3) Scan Decimal Barcode “1”=>”2”=>”0”=>”8”=>”3”=>”0”=>”1”=>”3”=>”3”= >”0”...

  • Page 24: Upc

    Enter Enter UPC-E Wait Add – on Read *Enable Enable *Desable Desable Transmission Checksum Wait Add – on Enable *Enable *Desable Desable Add – on Type *None Add-on 5 Add-on 2 Add-on 2+5...
  • Page 25 Enter Enter EAN-13 Expansion Read Enable *Enable Desable *Desable Transmission Checksum Wait Add – on Enable *Enable *Desable Desable Add – on Type *None Add-on 5 Add-on 2 Add-on 2+5...
  • Page 26 Enter Enter EAN-8 ISBN /ISSN Conversion Read Enable *Enable Desable *Disable Wait Add – on Transmission Checksum Enable *Enable Disable *Desable Add – on Type *None Add-on 5 Add-on 2 Add-on 2+5...
  • Page 27 Enter Enter Code-39 Expansion Read *Enable Enable Disable *Disable Transmission Checksum Type *Standard *Enable Disable Full ACSII Code 32 Translation *None Code-32 with ‘A’ Code-32...
  • Page 28 Enter Enter Codabar / NW7 Transmission Start / End Read Enable *Enable Disable *Disable Checksum Verification Start / End Symbol types Enable *ABCD / ABCD ABCD / TN*E *Disable Transmission Checksum abcd / abcd abcd / tn*e Enable Same Start / End Pair *Disable Enable *Disable...
  • Page 29 Enter Enter Code 128 Transmission Start / End Read Enable *Enable Disable *Disable Type Checksum Verification Enable *Standard *Disable UCC-128 Checksum Verification Transmission Checksum *Enable Enable Disable *Disable Transmission Checksum Enable *Disable...

  • Page 30: Interleaved 2 Of 5

    Enter Interleaved 2 of 5 Connection Data Read Enable When “Type” is set “UCC-128”, you can set connection data. If the value is configured as “Null” , it will show default value”<GS>”, if the value is not configured “Null” will refers to ASCII table for related setting. *Disable Checksum Verification (1) Enter...

  • Page 31: Industrial 2

    Enter Enter Industrial 2 of 5 Matrix 2 of 5 Read Read Enable Enable *Disable *Disable Checksum Verification Checksum Verification Enable Enable *Disable *Disable Transmission Checksum Transmission Checksum Enable Enable *Disable *Disable...
  • Page 32 Enter Enter Code 93 Code 11 Read Read Enable Enable *Disable *Disable Transmission Checksum Transmission Checksum Enable Enable *Disable *Disable Checksum Verification Checksum Verification Disable Disable *Two *Two...

  • Page 33: Msi / Plessey

    Enter Enter UK / Plessey MSI / Plessey Read Read Enable Enable *Disable *Disable Transmission Checksum Verify Checksum Enable Enable *Disable *Disable Checksum Verification Transmission Checksum Disable Enable Mod 10 /10 *Disable Mod 11 /10 *Mod 10...

  • Page 34: Telepen

    Enter Enter Telepen RSS (GS1 DataBar) 14 Read Read Enable Enable *Disable *Disable Checksum Verification Code Mark *Enable Enable *Disable Disable Type Application ID Numeric Enable *Disable *Auto switching Transmission Checksum ASCII Enable Transmission Checksum *Disable Enable *Disable...

  • Page 35: Rss (Gs1 Databar) Limited

    Enter Enter RSS (GS1 DataBar) Limited RSS (GS1 DataBar) 14 Stack Read Read Enable Enable *Disable *Disable Code Mark Code Mark Enable Enable *Disable *Disable Application ID Application ID Enable Enable *Disable *Disable Transmission Checksum Transmission Checksum Enable Enable *Disable *Disable...

  • Page 36: Rss (Gs1 Databar) Expansion

    Enter Enter RSS (GS1 DataBar) Expansion RSS (GS1 DataBar) Expansion Stack Read Read Enable Enable *Disable *Disable Code Mark Code Mark Enable Enable *Disable *Disable Application ID Application ID Enable Enable *Disable *Disable Transmission Checksum Transmission Checksum Enable Enable *Disable *Disable...

  • Page 37: Output Format Settings

    Enter Output Format Settings Preamble / Postamble Preamble Data Transmission Preamble There is control digits can be programmed as Preamble. It will be appended automatically when each barcode is decoded. The string of Preamble data will be before the barcode data. *Enable (1) Enter Disable...

  • Page 38: Postamble Data

    Prefix / Suffix Prefix Data Postamble Data Generally, your application needs to append a carriage return character Appending characters behind the preamble data and before the barcode to finish data transmission. Or you may set the Postamble to be Disable data, prefix data can be configured.

  • Page 39: Suffix Data

    Enter Code ID / Sub Code ID Suffix Data Code ID Setting Example： Appending characters behind the barcode data and before the Change UPC-A Code ID to ”B” postamble data., suffix data is configurable. The string of suffix data will (A) Scan “Enter”...

  • Page 40: Wait Add-On Count

    Wait Add-On Count Code ID for Code-93 This setting is used for WPC add-on code, such as UPC-A, UPC-E, EAN-13 and EAN-8. The WPC code must be decoded first, then Add-on code. Add-on code may not be decoded with WPC at the same time. Code ID for MSI / Plessey Therefore, you can set wait add-on count to force the add-on code must be output with WPC code together.

  • Page 41: Min. / Max. Length

    Enter Enter Min. / Max. Length Min. Length Min. Length for Telepen Procedure： (A) Scan “Enter” barcode Min. Length for Codabar / NW7 (B) Scan “Min. Length” barcode (C) Scan parameters from Hexadecimal/ decimal table Min. Length for Interleaved 2 of 5 (D) Scan “OK“...

  • Page 42: Max. Length

    Enter Enter Max. Length Max. Length for Telepen Procedure： Max. Length for Telepen (A) Scan “Enter” barcode (B) Scan “Max. Length” barcode (C) Scan parameters from Hexadecimal/ decimal table Max. Length for Codabar / NW7 (D) Scan “OK“ barcode (E) Scan “End” barcode Max.

  • Page 43: Truncate Zero

    Enter Enter Truncate Zero Truncate Zero for UPC-E When the barcode leading have “0”, you can configured this function to truncate all leading "0" of barcode. Enable Example: Barcode "00054321"=>Output "54321" *Disable Truncate Zero for UPC-A Truncate Zero for EAN-8 Enable Enable *Disable...
  • Page 44 Enter Enter Truncate Zero for Industrial 2 of 5 Truncate Zero for Matrix 2 of 5 Enable Enable *Disable *Disable Truncate Zero for Code-93 Truncate Zero for Code-11 Enable Enable *Disable *Disable Truncate Zero for MSI / Plessey Truncate Zero for UK / Plessey Enable Enable *Disable...

  • Page 45: Truncate Leading

    Enter Enter Truncate Leading Truncate Zero for RSS(GS1 DataBar) Limited The leading characters of barcode data will be truncated when these values are set to non zero. It will be output nothing except beeps if the truncate value is more than barcode data digits or overlap with the Enable Ending.
  • Page 46 Enter Enter Truncate leading for Code-93 Truncate leading for UK / Plessey Truncate leading for MSI / Plessey Truncate leading for Telepen Truncate leading for RSS(GS1 DataBar) Limited Truncate leading for UPC-E Truncate leading for EAN-8 Truncate leading for RSS(GS1 DataBar) Expansion Truncate leading for RSS(GS1 DataBar) 14 Truncate leading for Codabar / NW7 Truncate leading for RSS(GS1 DataBar) 14 Stack...

  • Page 47: Truncate Ending

    Enter Enter Truncate Ending The ending characters of barcode data will be truncated when these values are set to non zero. It will be output nothing except beeps if the Truncate Ending for Industrial 2 of 5 truncate value is more than barcode data digits or overlap with the leading.

  • Page 48: Insert 0 Position

    Enter Enter Insert 0 Position When adding data to the barcode data, insert position and insert data function must be configured. If the insert position is configured as 0, the Truncate Ending for Code-11 character will insert in the front of the barcode data. Procedure Truncate Ending for UK / Plessey (A) Scan “Enter”...
  • Page 49 Enter Enter Insert 0 Position for Code-93 Insert 0 Position for Telepen Insert 0 Position for UPC-E Insert 0 Position for RSS(GS1 DataBar) Limited Insert 0 Position for EAN-8 Insert 0 Position for RSS(GS1 DataBar) Expansion Insert 0 Position for UK / Plessey Insert 0 Position for Codabar / NW7 Insert 0 Position for Interleaved 2 of 5 Insert 0 Position for RSS(GS1 DataBar) 14...

  • Page 50: Insert 1 Position

    Enter Enter Insert 1 Position When adding data to the barcode data, insert position and insert data function must be configured. Insert 1 Position for Code-93 If insert position is configured as 1, the character will be inserted behind the first barcode digit. The insert position value can be configured according to user preferences.

  • Page 51: Insert 0 Data

    Enter Enter Insert 0 Data This function can append one or two characters into the barcode data. But please make sure the value of insert position can not be greater than Insert 1 Position for MSI / Plessey the length of barcode Otherwise, setting will be no effect. Insert 1 Position for Telepen Procedure (A) Scan “Enter”...
  • Page 52 Enter Enter Insert 0 Data for Code-93 Insert 0 Data for UK / Plessey Insert 0 Data for MSI / Plessey Insert 0 Data for Telepen Insert 0 Data for UPC-E Insert 0 Data for RSS(GS1 DataBar) Limited Insert 0 Data for RSS(GS1 DataBar) Expansion Insert 0 Data for EAN-8 Insert 0 Data for Codabar / NW7 Insert 0 Data for RSS(GS1 DataBar) 14...

  • Page 53: Insert 1 Data

    Enter Enter Insert 1 Data This function can append one or two characters into the barcode data. But please make sure the value of insert position can not be greater than Insert 1 Data for Code-93 the length of barcode Otherwise, setting will be no effect. Procedure Insert 1 Data for MSI / Plessey (A) Scan “Enter”...

  • Page 54: Hexadecimal / Decimal Table

    Enter Enter Appendix：Hexadecimal / Decimal Table Insert 1 Data for UK / Plessey Insert 1 Data for Telepen Insert 1 Data for RSS(GS1 DataBar) Limited Insert 1 Data for RSS(GS1 DataBar) Expansion Insert 1 Data for RSS(GS1 DataBar) 14 Insert 1 Data for RSS(GS1 DataBar) 14 Stack Insert 1 Data for RSS(GS1 DataBar) Expansion Stack...

  • Page 55: Ascii Code Table

    Appendix：ASCII Code Table Appendix：ASCII Code Table...

This manual is also suitable for:

Ds-800

Table of Contents