NETGEAR WNHD3004 User Manual page 43

Table 6-1 describes the Device Info status fields.
Table 6-1. Device Info Status Fields
Field
General
Time
System up time
Firmware Version
LAN
Connection Type
MAC Address
IP Address
IP Subnet Mask
Default Gateway
Primary DNS Server
DHCP Server
Wireless LAN
Wireless Radio
MAC Address
Network Name (SSID)
Channel
Security Mode
Wi-Fi Protected Setup
Using Network Management Tools
3DHD Home Theater Adapter WNHD3004 User Manual
Description
The current time.
How long the unit has been running since its last restart.
The version of the firmware running in the unit.
If set to None, the unit has a fixed IP address. If set to DHCP Client,
the unit obtains an IP address dynamically from a DHCP server.
The Media Access Control address. This is the unique physical
address being used by the Ethernet ports of the unit.
The IP address being used by the Ethernet port of the unit.
The IP subnet mask. For an explanation of subnet masks and subnet
addressing, click the link to the online document
Basics" in Appendix B.
The IP address of the router in your network.
The Primary Domain Name Server addresses being used by the
router. A Domain Name Server translates human-language URLs
such as www.netgear.com into IP addresses.
The Secondary Domain Name Server addresses being used by the
router.
The WNHD3004 wireless signal should be enabled all the time.
This is the unique physical address being used by the Ethernet ports
of the wireless interface.
The wireless network name (SSID) being used by the wireless port of
the Bridge/AP. The default is WNHD3400
Identifies the channel of the wireless port being used. Click the link to
the online document "Wireless Networking Basics" in Appendix B
the frequencies used on each channel.
Indicates the wireless security mode:
• None
• WPA/WPA2-PSK - Mixed (the default)
Indicates whether WPS is enabled.
v1.0, November 2010
"TCP/IP Networking
.
for
6-3