Network Connection - Samsung LA32D550 User Manual

Series 5 32 -40 -46 inch lcd tv

Hide thumbs

Table Of Contents

Table of Contents

Network Connection - Wireless

You can connect your TV to your LAN through a standard wireless router or modem. To connect wirelessly,

you must first attach a "Samsung Wireless LAN Adapter" (WIS09ABGN, WIS09ABGN2, WIS10ABGN - sold

separately) to either the USB 1 (HDD) or USB 2 port on the back of your TV. See the illustration below.

The LAN Port on

the Wall

Samsung's Wireless LAN adapter is sold separately and is offered by select retailers, Ecommerce sites and

Samsungparts.com. Samsung's Wireless LAN adapter supports the IEEE 802.11a/b/g and N communication

protocols. Samsung recommends using IEEE 802.11n. When you play the video over a IEEE 802.11b/g

connection, the video may not play smoothly.

Most wireless network systems incorporate a security system that requires devices that access the network

through an access point or wireless router (typically a wireless IP Sharer) to transmit an encrypted security code

called an access key.

If Pure High-throughput (Greenfield) 802.11n mode is selected and the Encryption type is set to WEP, TKIP or

TKIP AES (WPS2Mixed) for your wireless router, Samsung TVs will not support a connection in compliance with

new Wi-Fi certification specifications.

Network Connection - Wired

There are two main ways to connect your TV to your network using cable, depending on your network setup.

They are illustrated below:

The Modem Port on the Wall

The LAN Port on the Wall

✎

A network speed of lower than 10 Mbps is not supported.