Connecting An Antenna; Aiming The Antenna - Niles TM-SIRIUS Quick Install Manual

INSTALLATION (CONT'D)

Connecting an Antenna

to the TM-SIRIUS Module Card
When all modules are in place, and the system components
A
have been installed, connect a satellite radio antenna to the
C
50Ω ANT jack on the TM-SIRIUS Module Card .
Note: A Satellite Radio Antenna is not included with the TM-SIRIUS

Aiming the Antenna

Choose a mounting location for the Satellite Radio Antenna that
has a clear and unobstructed view of the sky. See the SIRIUS
Antenna Directional Map on page 9 for instructions on position-
ing the antenna for optimum signal strength in your area of the
country.
Multiple TM-SIRIUS Module Cards
When using more than one TM-SIRIUS Module Card in an in-
stallation, each tuner must be connected to a satellite radio an-
B
tenna. The Niles SRK-2W or SRK-4W allows for one antenna
to provide proper signal strength to multiple TM-SIRIUS tuner
modules. (See Figure 5.)
Niles manufactures a line of satellite radio accessories that
include a satellite radio antenna (ANT-SAT) and an Installation
B
Kit for One Satellite Radio Tuner (SRK-1W) . (See Figure 4
and 5.)
See www.nilesaudio.com for the complete line of Satellite Radio
Accessories.
6