Subscribe to Our Youtube Channel
Related Manuals for Strong SRT ANT 45
Summary of Contents for Strong SRT ANT 45
- Page 1 Digital Active Outdoor DVB-T/T2 Antenna SRT ANT 45 User Manual Manuel d’utilisateur Bedienungsanleitung Istruzioni d’uso Manual de usuario Manual do Usuário Bruksanvisning Bruger Manual Használati útmutató Návod k obsluze...
- Page 2 5.0 InStallatIon of thE antEnna 1.0 IntroductIon Thank you for purchasing the STRONG SRT ANT 45 DVB-T/T2 antenna. This antenna has been specially designed to receive digital terrestrial signals. It can be connected to any Digital Terrestrial Receiver (DVB-T/ T2), and is specially designed for outdoor use. The antenna housing is UV protected and weather-proof sealed.
-
Page 3: Package Contents
PART 1 2.0 PackagE contEntS 1. Active DVB-T/T2 Outdoor Antenna. 2. Multidirectional base. 3. Wall mounting kit. 4. Pole Mounting kit. 5. Coaxial Cable. 6. Power Injector. 7. AC/DC Adaptor. Fig. 1 3.0 SafEty notES Be careful working outside with overhead power lines to avoid electrocution „... - Page 4 PART 1 4.0 connEctIng thE antEnna Preparations 1. Check if the broadcast in your country is horizontally or vertically polarised. 2. Fix the antenna to the multi-directional base as shown in the pictures: 3. Depending on how the signals are broadcasted (horizontally or vertically) you will have to mount your antenna in the horizontal or vertical position for best performance.
- Page 5 PART 1 Fig. 4 1. Digital TV 2. STB 3. Active DVB-T/T2 Outdoor Antenna. 4. HDMI or SCART cable (optional) 5. Coaxial cable 6. Water-Drop Loop (recommended) If your receiver does not support 5 V antenna power, then please follow the next steps: 4.2 to power the antenna with external power adaptor 1.
- Page 6 NoTE It is recommended NOT to place the antenna near to: Devices that are strong source of radiation or interference such as DECT and GSM „ „ telephones, transmitters, microwaves, Wi-Fi, etc.
- Page 7 PART 1 You can fix the antenna on the wall, on the balcony or on a metal pole. 5.1 Installation on the wall 1. Take the multi directional base and hold it to the position on the wall 2. Mark the 4 holes with a pencil 3.
Need help?
Do you have a question about the SRT ANT 45 and is the answer not in the manual?
Questions and answers