Soundstream VHP-12 User Manual

SeUNDSTREAM
"'I--IP-:::Li:::!
Dual ChanneiiR Wireless Stereo Headphone
USER' S MANUAL
Installing batteries into the Headphone
• Open the battery compartment cover(@) located on the earpiece.
• Insert 2 AAA alkaline batteries( not included) according to polarity
• Close the battery compartment cover(@).
(1 )(3)Infrared light sensor
(2)Battery compartment cover
( 4 )Power and channel switch
( 5)Power and channel indicator
(6)Volume control knob
(?)Monitor button
(8)Audio input jack for wired headphone
Using the wireless headphone
4
5
1. Press the Power and channel switch of the he.adphone to turn on, the
Power and ch·annel indicator turns to red and it turns to green when the
headphone receives theIR signal.
2. Adjust the volume of the headphone with the Volume control knob to desired
listening level.
\
3. You can silence the music to listen outside by pressing. the Monitor button
continuously and releasing the Monitor button to listen to the sound of the
headphone playing again.
6
4. Press the Power and channel switch of the headphone to power off the headphone
when it is not in use for a long time.
S.Connect audio source and Audio input jack of the headphone with audio connect
lin.e, the headphone is also used as regular wired stereo headphone without battery.
6.You can rotate the earcups 90° and the fold-flat earcups increases portability and
eas,e of storage.