Section 5: Maintenance - Grizzly T10007 Owner's Manual

SECTION 5: MAINTENANCE

General
Regularly check mounting hardware for
cracks, unsafe wear, deformation, or warp-
ing. DO NOT attempt to fix the mounting
harware! Discard and replace all damaged
mounting hardware. Regularly check for
loose pins, rings, screws, and safety latch-
es. Tighten or replace any loose items.
Damaged or loose parts may cause the
load to fall and may result in serious
injury.
Always keep the scale in a hanging posi-
tion to relieve strain on the load cell. Never
leave a load or weighing equipment on the
scale when not in use. This may cause
excessive strain on the precision weighing
device and may result in inaccurate read-
ings and shorten the life of your scale.
When recharging the scale battery, charge
for at least 8 hours. Excessive charging
will not damage the battery. Batteries must
be recycled or disposed of properly.
If your scale malfunctions permanently,
do not attempt to fix it yourself. Contact a
certified professional for any electrical or
detailed calibration work.
-10
-
BATTERY MUST BE RECYCLED OR DISPOSED
OF PROPERLY. Consult your local disposal com-
pany for recycling options in your area.
If the scale becomes dirty, clean the
screen with a soft cloth using a mild win-
dow cleaner or detergent. Avoid using
paper towels. DO NOT use solvents,
chemicals or other corrosive materials to
clean the scale.
If the scale will not be used for a pro-
longed amount of time, remove the battery.
Suspend the scale at all times and do not
allow it to rest on the ground.
Always DISCONNECT POWER before
servicing, adjusting, or doing main-
tenance to reduce the risk of acci-
dental injury or electrocution.
Model T10007 300 Kg Digital Crane Scale
!