Do you have a question about the APT1216 and is the answer not in the manual?
Questions and answers
Summary of Contents for All-Power APT1216
Page 1
APT1216 Owner’s Manual 24V Cordless Lawn Mower HAVE QUESTIONS OR NEED SERVICE DO NOT RETURN TO STORE! 888.896.6881 READ AND SAVE THESE INSTRUCTIONS!
Table of Contents Before Using................2 Warning..................3 Use of Product................3-4 Part List..................4 Assembly................5-6 Battery Charging and Recharging..........6-7 Operation................8-11 Cutting Height Adjustment................9 Starting and Stopping..................9 Reset Button....................9 Mower....................10-11 Maintenance................11 Storage..................11 Technical Data and Features............12 Limited Warranty...............12...
BEFORE USING THE NEW ELECTRIC RECHARGEABLE POWER REEL MOWER Please read this guide and use these operating instructions to become familiar with the mower and its features. The charging of batteries, operation of the mower, and notes on safety and maintenance procedures are important for the use and enjoyment of this product.
19.Switch on the motor according to instruction and with feet well away from the blade. 20.Do not tilt appliance when switching on the appliance. 21.Keep all nuts,bolts and screws tight to be sure the equipment is in safe working condition. 22.Replace worn or damaged parts for safety.
Owner’s Manual This mower is designed for use on residential lawns. It is not designed for commercial use or for use in public facilities, parks, sporting grounds, roads, or in agriculture or forestry areas. This mower is for cutting lawns only. It must not be used to trim hedges, bushes or shrubs, for cutting or pruning, or for any mowing where both wheels and the roller are not fully supporting the mower.
Owner’s Manual ASSEMBLY Unpack and remove the whole unit from packaging, and ensure all the parts are present.(See Figure 1) 1. Set the cutting height to the highest setting. This will make it easier attach the lower handle section. 2. Fit the Lower handle onto the two large lugs Fit one side and then flex on the Main Unit.
Owner’s Manual 5. Once the Handle is assembled connect the plug on the handle cable to the socket on the main unit. Tighten the screw ring to secure the cable. (See Figure 5) Figture 5 6. Secure the cable to the handle using the 3 cable clips.(See Figure 6) Figure 6...
Owner’s Manual BATTERY CHARGING AND RECHARGING Before First use charge the battery for 24 hours The battery does not have to be removed from the product to be charged. To charge the battery in the product, and plug the charger connector onto the battery socket.
CHARGING INSTRUCTIONS: there are 5 LED on the main unit, The first three Led are showing the power capacity of the mower during operating. When the first 3 LED turn off and the fourth LED turns darker, it reminds you that the mower is lack of power and need to be charged.
Owner’s Manual (2) Loosen the two large black knobs, one on each side of the mower body, to allow movement of the roller arms.(See Figure 9) Figure 9 (3)Slide the roller supports until the roller is at the required position, ensuring that it is level and the knobs are at the same height.
3.Starting and Stopping Warning Before starting the mower, check within the blade area for any foreign • objects and remove them. • Do not operate the mower on areas other than turf surfaces.The mower should be sitting on its wheels on a level part of lawn before starting operation.
The roller apron keeps clippings from falling down between the cutting bar and the roller thus missing the grass catcher. The roller apron is installed just behind the cutting bar using the two screws provided.Once the roller apron is installed it is not necessary to remove it whether or not you are using the grass catcher.
Need help?
Do you have a question about the APT1216 and is the answer not in the manual?
Questions and answers