Related Manuals for J&J Electronics PureWhite
Summary of Contents for J&J Electronics PureWhite
- Page 1 PureWhite ™ Light Fixture Installation and Operation Guide Technical Support Phone: 800.735.4553 ext. 242 For more information about this or other J&J Electronics lighting products, please visit www.jandjpoolspa.com...
- Page 2 PUREWHITE POOL AND SPA LED LIGHT FIXTURE Available in 120VAC and 12VAC models PureWhite Pool and Spa LED light fixtures offer superior, bright white illumination for your pool. This owner’s manual contains important information on installing and using your new PureWhite Pool and Spa LED light fixture. Read and follow all instructions contained in this manual.
- Page 3 PUREWHITE POOL AND SPA LED LIGHT FIXTURE INSTALLATION (NEW POOL OR SPA CONSTRUCTION) The following steps detail installation of the PureWhite LED light fixture into a new pool or spa construction. Read this section in its entirety prior to beginning any installation.
- Page 4 electrical system must be installed by a licensed or certified electrician to meet or exceed those requirements prior to installation of the light. This includes, but is not limited to, the following National Electrical Code requirements: • Installation of a ground fault circuit interrupter (GFCI) for line voltage models on the lighting circuit with an appropriately rated circuit breaker.
- Page 5 10 mintues to prevent damage to the light. 5. Using the stainless steel pilot screw provided, install the PureWhite LED light fixture assembly into the niche, carefully tightening the pilot screw. (reference Figure 1) WARNING! Use only the stainless steel pilot screw provided with this underwater light.
- Page 6 EXISTING CONSTRUCTION INSTALLATION STEPS (ONCE ALL ELECTRICAL REQUIREMENTS ARE MET) The following steps detail installation of the PureWhite LED light fixture into an existing pool or spa. Read this section in its entirety prior to beginning any installation. WARNING! Pool or spa electrical system must meeting current code requirements.
- Page 7 Figure 1. 10. Install the PureWhite light fixture into the niche. 11. Using the stainless steel pilot screw provided, install the PureWhite LED light fixture assembly into the niche, carefully tightening the pilot screw. (reference Figure 1) 12.
-
Page 8: Year Limited Warranty
J&J Electronics | Irvine, California www.jandjpoolspa.com © 2012 J&J Electronics, Inc. All rights reserved. PureWhite™ is a trademark of and manufactured by J&J Electronics, Inc. All registered and trademarked brands and names are the property of their respective companies. REF. 120712...