Blade Guides - Grizzly G9743 Owner's Manual

Blade Guides

The blade guides should be as close to the
workpiece as possible. This will help ensure
straight cuts by keeping the blade from twisting
and drifting off the cut line.
To adjust the blade guides:
1. Loosen the knob shown in Figure 19 and
slide the rear blade guide as close to the
workpiece as possible, then tighten the
knob.
G9743 7" x 12" Metal-Cutting Bandsaw
Blade Guides
Knob
Figure 19. Blade guides.
-23-