Specifications - Behringer Xenyx 1002FX User Manual

14
strain relief clamp
sleeve
ring
tip
sleeve
ground/shield
ring
cold (-ve)
tip
hot (+ve)
For connection of balanced and unbalanced plugs,
ring and sleeve have to be bridged at the stereo plug.
Balanced ¼" TRS connector
Fig. 4.3: ¼"stereo plug
strain relief clamp
sleeve
ring
tip
sleeve
ground/shield
ring
right signal
tip
left signal
¼" TRS headphones connector
Fig. 4.4: Stereo plug for headphones connection
5.

Specifications

Mono inputs
Microphone inputs
Type
Mic E.I.N. (20 Hz - 20 kHz)
@ 0 Ω source resistance
@ 50 Ω source resistance
@ 150 Ω source resistance
Frequency response
Gain range
Max. input level
Impedance
Signal-to-noise ratio
Distortion (THD+N)
Line input
Type
balanced
Impedance
Gain range
Max. input level
Fade-out attenuation1 (Crosstalk attenuation)
Main fader closed
Channel fader closed
Frequency response
Microphone input to main out
<10 Hz - 80 kHz
<10 Hz - 137 kHz
Stereo inputs
Type
Impedance
Max. input level
EQ mono channels
Low
Mid
High
XENYX 1002FX/1202FX User Manual
XLR, electronically balanced,
discrete input circuit
-132.7 dB / 137 dB A-weighted
-130 dB / 133.9 dB A-weighted
-127.1 dB / 130.9 dB A-weighted
<10 Hz - 200 kHz (-1 dB)
+10 to +60 dB
+12 dBu @ +10 dB gain
approx. 2.6 kΩ balanced
-107 dB / -111 dB A-weighted
(0 dBu In @ +22 dB gain)
0.005% / 0.003% A-weighted
¼" TRS connector electronically
approx. 20 kΩ balanced
10 kΩ unbalanced
10 to +40 dB
+20 dBu @ 0 dB Gain
85 dB
88 dB
+0 dB / -1 dB
+0 dB / -3 dB
¼" TRS connector, electronically
balanced
approx. 20 kΩ bal. / 10kΩ unbal.
(+4 dBu operating level)
approx. 20 kΩ bal. / 5kΩ unbal.
(-10 dBV)
+22 dBu
80 Hz / ±15 dB
2.5 kHz / ±15 dB
12 kHz / ±15 dB