Related Manuals for Elation IMAGE PRO 300 II
Summary of Contents for Elation IMAGE PRO 300 II
-
Page 1: User Manual
IMAGE PRO 300 II USER MANUAL English Version 1.0 Part No.24-004-2319-00 Http: www.elationlighting.com E-mail: support @ elationlighting.com -11-... -
Page 2: Table Of Contents
Fixed Lens Holder & Single/Multi-elements Lens The Image Pro 300 II supplies the Lens Hoder as standard equipment together Contents with the chosen lens and on which mirror accessories can be mounted; by positioning the support correctly on the guides, the projected image can be focused perfectly. -
Page 3: Welcome
You may also visit us on the web at www.elationlighting.com for any comments or suggestions. The Image Pro 300 II comes with a fixed gobo holder and 6 metal gobos. These Service Hours are Monday through Friday 9:00 a.m. to 5:00 p.m. -
Page 4: General Information
IP-3 IP-2 Light can indicate, define, emphasize, characterize and enhance any subject. Adjustable Rotating/ Image Pro 300 II is a range of well-designed image projection tools using light to pivoting Static get your message across. mirror gobo... -
Page 5: Safety Instructions
Fuse Replacement General Information 1. Disconnect the fixture from power. Safety Instructions: 2. With a flat screwdriver wedge the fuse holder out of its housing. 3. Remove the old fuse from the holder and replace with the exact same type This product must be earthed. -
Page 6: Lamp Replacement
4. Always be sure to dry all parts completely before plugging in. Securing the Image Pro 300 II Secure the Image Pro 300 II. Regardless of the rigging of the Image Pro 300 II, you have to use a safety wire to fix your fixture. Therefore you have to thread to safety wire through one provided holes on the yoke and connect it with the truss for tree mounting application.
Need help?
Do you have a question about the IMAGE PRO 300 II and is the answer not in the manual?
Questions and answers