Radio Shack Amplified Video Selector Owner's Manual page 2

15-2100.fm Page 2 Wednesday, December 8, 1999 8:11 AM
FEATURES
Your RadioShack Amplified Video Selector makes it easy to
connect up to five video sources and up to three TVs or VCRs.
Then, with the press of a button, you can select any of the video
sources for viewing or recording on each TV or VCR.
Five Input Jacks let you connect up to five standard video
signal sources, such as a VCR, a video disc player, a satellite
receiver, a TV antenna, and cable TV.
let you send the signal sources to up to
Three Output Jacks
three TVs or VCRs, so that you can view or record each video
source.
Three Built-In Amplifiers eliminate almost all signal loss
caused by switching and splitting of the TV signals, while maintain-
ing the separation between output signals.
Coaxial Connectors provide secure, reliable connections.
This amplified video selector complies with FCC limits for high
isolation. These limits help ensure that your video sources do not
interfere with other devices.
Note to Cable TV System Installer
This reminder is provided to call the CATV system installer's atten-
tion to article 820-40 of the NEC that provides guidelines for proper
grounding and, in particular, specifies that the cable ground be
connected to the grounding system of the building as close to cable
entry as practical.
©
1999 Tandy Corporation.
All Rights Reserved.
RadioShack is a registered trademark used by Tandy Corporation.
2