Oldsmobile BRAVADA GTK 2004 Getting To Know Manual page 11

Setting the Clock: Press and hold the
H (or HR) button until the correct hour
appears. AM or PM will appear on the
radio display. Press and hold M (or MN)
until the correct minute appears.
To set the clock to the time of an FM
station broadcasting RDS information,
press/hold hour and minute simultane-
ously for two seconds until UPDATED
(and the clock symbol) appears on the
display. If the time is not available from
the station, NO UPDAT will appear.
Setting Stations: You can set up to 18
station presets (six AM, six FM1 and six
FM2).
• Turn the radio on
• Press AM-FM to select the band (AM,
FM1 or FM2)
• Tune to the desired station using the
seek function or tune knob
• Press AUTO EQ or AUTO TONE (as
applies to your radio) to select the
sound equalization best suiting the
type of station selected
• Press/hold a numbered button until a
beep confirms storage of the station
• Repeat the previous steps for each
pushbutton
Using RDS Mode: Your radio's RDS
mode allows you to:
• Seek only stations with your preferred
programming type
• Seek to stations with traffic
announcements
• Receive announcements of local
and/or national emergencies
• Receive and display messages from
radio stations
RDS features are available on FM
stations that broadcast RDS information.
When tuned to an RDS station, the radio
displays the station name instead of the
frequency. Most RDS stations broadcast
their station name, time of day and a
Program Type (PTY).
DISP: Press this knob to toggle between
the station frequency, station name, PTY
and the name of the program if avail-
able.
TRAF: Press this button to activate the
traffic announcement feature. When a
traffic announcement is being broadcast
on the tuned station you will hear it,
even if the volume is muted or a cas-
sette tape or CD is playing.
INFO: If the tuned station has a mes-
sage, the radio displays INFO. Press
the INFO button to see the message.
P-TYPE LIST: Use this button to turn the
Program Type selection on or off. Turn
the P-TYPE knob to select the Program
Type you want, then press the SEEK or
SEEK TYPE button (as it applies to your
radio) and the radio seeks to the first
RDS broadcast of the selected Program
Type.
AM FM (Alternate Frequency): Allows
the radio to switch to a station with a
stronger signal and of the same PTY.
Press and hold the button for two sec-
onds to turn it on; repeat to turn it off.
ALERT!: Warns of local or national
emergencies and appears on the display
during such an announcement. If a CD
or cassette tape is playing, the
announcement overrides it.
See Section 3 of your Owner Manual.
11