Summary of Contents for Cinepro 4K6 MK-4 SE-Gold
- Page 1 CINEPRO 4 SE GOLD HIGH RESOLUTION - EXTENDED DYNAMIC SIX CHANNEL THEATER AMPLIFIER OWNERS MANUAL DESIGNED FOR BOTH CONSUMER AND COMMERCIAL USE 4K6 MK-4 SE-Gold Copyright ©2003 Cinepro Inc.
-
Page 2: Table Of Contents
CONGRATULATIONS! THE CINEPRO 4K6 MK-4 SE-GOLD IS A POWER AMPLIFIER THAT COMBINES INCREDIBLE POWER RESERVES WITH OUTSTANDING CLARITY AND FINESSE. IT IS HAND-BUILT BY SKILLED AMERICAN CRAFTSMEN. IT IS THE PINNACLE OF DESIGN, ENGINEERING AND CONSTRUCTION IN THE SERVICE OF CINEMA AND MUSIC. -
Page 3: Locating Your Amplifier
This system maintains the amplifi er circuitry at the optimum operating temperature. The Cinepro 4K6 MK-4 SE-Gold may be mounted in a cabinet or on a shelf, provided that there are at least two inches of space behind the heat sinks, and three inches of clear space above the amplifi er. -
Page 4: Rear Panel Connections - Input
INPUTS Hook the signal cords from your processor to the respective inputs on the Cinepro 4K6 MK-4 SE-Gold. Note that all inputs are marked with the logical speaker positions - Front Left/Ch. 1, Front Right/Ch. 2, Center/Ch. 3, etc. These correspond to the front panel markings and the speaker output jacks. -
Page 5: Speaker Hookup - Output
REMOTE POWER OPERATION - 12V TRIGGER On the back panel, below the input terminals, is a 12 volt remote trigger jack. This is useful for having the Cinepro 4K6 MK-4 SE-Gold come on when the receiver or processor is turned on automatically. Some high end processors have a 12 volt remote trigger output designed just for this purpose. -
Page 6: Operating Notes
If the protection lamp illuminates, and the wall voltage has been verifi ed to be around 120 volts, this indicates an internal problem with the amplifi er, or the signal feeding it. Power the 4K6 MK-4 SE-Gold down for 2-3 minutes. This allows the protection circuit to reset. -
Page 7: Bi-Wiring, Bi- And Tri-Amplifying
RCA “Y” adaptor to feed each two channel pair from one preamplifi er source. With the six channels available on the 4K6 MK-4 SE-Gold, you can fully bi- amplify three speakers in your system. For example: front left, center, and front NOTE: REMOVE ANY right. -
Page 8: Specifications And Features
SPECIFICATIONS AND FEATURES 4K6 MK-4 SE-GOLD OUTPUT POWER (ALL RATINGS 20-20KHZ @ < .10% DISTORTION, TYPICALLY .009%) OUTPUT POWER (ALL RATINGS 20-20KHZ @ < .10% DISTORTION, TYPICALLY .009%) OUTPUT POWER Multi-channel Mode - per channel: 1200 WATTS-2 OHMS 800 WATTS-4 OHMS... -
Page 9: Warranty
5 YEAR LIMITED WARRANTY - 4K6 MK-4 SE-GOLD CINEPRO warrants this amplifi er to the original purchaser for a period of 5 years. Any failure due to parts or manufacturing defect will be repaired without charge during the warranty period.
Need help?
Do you have a question about the 4K6 MK-4 SE-Gold and is the answer not in the manual?
Questions and answers