1. Manuals
  2. Brands
  3. Teledex Manuals
  4. Wireless Router
  5. EXA100
  6. User manual

Teledex EXA100 User Manual

Y series wireless ap router
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
Y SERIES EXA100
USER GUIDE
Wireless AP Router

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the EXA100 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for Teledex EXA100

  • Page 1 Y SERIES EXA100 USER GUIDE Wireless AP Router...

  • Page 2: Important Safety Instructions

    There may be useful, but WITHOUT ANY WARRANTY; without be a remote risk of electric shock from even the implied warranty of MERCHANTABILITY lightening. Also, do not use the telephone to or FITNESS FOR A PARTICULAR PURPOSE. See report a gas leak in the vicinity of the leak. the GNU General Public License for more details. • Never install telephone wiring during stormy weather conditions. www.teledex.com Y SERIES EXA100 USER GUIDE...
  • Page 3 This symbol indicates that when the from your local government. equipment has reached the end of its useful life, it must be taken to a recycling center and processed separate from domestic waste. Y SERIES EXA100 USER GUIDE www.teledex.com...

  • Page 4: Table Of Contents

    5.3.5 Wire Equivalence Protection (WEP) ..13 5.3.6 Access Policy ......13 www.teledex.com Y SERIES EXA100 USER GUIDE...

  • Page 5: Chapter 1 Introduction

    Hence it can provide several kinds of application of the EXA100. methods to combine the wireless easily. It also provides state of the art security features such as 64/128 bit WEP encryption and WPA/WPA2 encryption, Firewall, and VPN pass through. 1.1 Features • Wireless 802.11n access point—up to 300Mbps • 2 LAN ports (punch by IDC connector) Y SERIES EXA100 USER GUIDE www.teledex.com...

  • Page 6: Chapter 2 Installation

    Wireless Link Solid ON Wi-Fi is operational 2.4 Reset Button Data transmission Flashing Restore the default parameters of the device by through Wi-Fi pressing the Reset button for five to ten seconds. www.teledex.com Y SERIES EXA100 USER GUIDE...

  • Page 7: Chapter 3 Web User Interface

    3.2 IP Configuration 3.2.1 STATIC IP MODE In static IP mode, you assign IP settings to your STEP 4: Click OK to submit these settings. PC manually. Follow these steps to configure your PC IP address to use subnet 192.168.1.x. Y SERIES EXA100 USER GUIDE www.teledex.com...

  • Page 8: Login Procedure

    STEP 3: password. After successfully logging in for the first time, you will reach this screen. STEP 2: A dialog box will appear, such as the one below. Enter the default username and password, as defined in section 3.1 Default Settings. www.teledex.com Y SERIES EXA100 USER GUIDE...

  • Page 9: Chapter 4 Device Information

    Security submenus. If either is disabled, their corresponding menu(s) will also be disabled. Device Info is the first selection on the main menu so it will be discussed first. Subsequent chapters will introduce the other main menu options in sequence. The Access Point Status screen display at startup. This screen shows software, IP settings, and other related information. Y SERIES EXA100 USER GUIDE www.teledex.com...

  • Page 10: Chapter 5 Wireless Setting

    APs overlap. have the same SSID. Input a descriptive name. Its length is up to 32 characters. Multiple This router supports multiple SSID SSIDs called Guest SSIDs or 1/2/3/4 Virtual Access Points. www.teledex.com Y SERIES EXA100 USER GUIDE...

  • Page 11: Ht Physical Mode

    Choose from Long Guard and Auto. Default is Auto. Modulation and Coding Scheme Range From 1 to 15, 32, and Auto. Default is Auto. Reverse Enable or disable Reverse Direction Direction Grant (RDG). Grant(RDG) Default is Enable. STBC Enable or disable STBC. Default is Enable. Aggregation Enable or disable MSDU(A-MSDU) Aggregation MSDU(A-MSDU). Default is Disable. Auto Block ACK Enable or disable Auto Block ACK. Default is Enable. Y SERIES EXA100 USER GUIDE www.teledex.com...

  • Page 12: Advanced Wireless

    Choose Wireless Settings>Security and the reach the RTS size. following page will be displayed. It allows you Tx Power The Tx Power range is to modify the settings to prevent unauthorized between 1 and 100. The accesses. default value is 100. Short Preamble Select Disable or Enable. www.teledex.com Y SERIES EXA100 USER GUIDE...

  • Page 13: Select Ssid

    Security Mode: There are 11 options, including Disable, OPEN, SHARED, WEPAUTO, WPA, WPA- PSK, WPA2, WPA2-PSK, WPAPSKWPA2PSK, WPA1WPA2, and 802.1X. 5.3.5 WIRE EQUIVALENCE PROTECTION (WEP) WEP Key (1-4): Input the key to encrypt wireless data. To allow encrypted data transmission, Y SERIES EXA100 USER GUIDE www.teledex.com...

  • Page 14: Example Of A Wds Topology

    5.4.2 EXAMPLE OF A WDS TOPOLOGY AP MAC It provides 4 AP MAC Addresses. AP1 <-- WDS --> Master AP (our AP) <-- WDS --> Address Input the MAC address of the AP3<-- WDS --> AP4 other APs. www.teledex.com Y SERIES EXA100 USER GUIDE...

  • Page 15: Wps

    It automatically observes the ID of the connected wireless station (if specified), MAC address, SSID, and current status. 5.7 AP Wireless Statistics This page displays the Wireless Statistics (both Transmit and Receive) of the EXA100. 5.5.1 WPS SUMMARY It displays the WPS information, such as WPS Current Status, WPS Configured, and WPS SSID. Reset OOB: Reset to out of box (OoB) configuration. Y SERIES EXA100 USER GUIDE www.teledex.com...

  • Page 16: Chapter 6 Management-Configuration Backup

    Simple Network Management Protocol (SNMP) allows a management application to retrieve Shows the current configuration version. statistics and status from the SNMP agent in this The EXA100 can update the configuration device. Select Enable from the drop-down menu, automatically via TFTP server. configure options, and click Apply to activate 6.1.3 GATEWAY IP FOR REMOTE SNMP.

  • Page 17: Tr-069 Client

    WAN Management Protocol. This username is used only for HTTP- NOTE: The update process will take about two based authentication of the WIFI minutes to complete. The device will reboot and the browser window will refresh to the Y SERIES EXA100 USER GUIDE www.teledex.com...

  • Page 18: Reboot

    NOTE: This entry has the same effect as the Reset button. The EXA100 board hardware and the boot loader support the reset to default. If the Reset button is continuously pressed for more than 5 seconds, the boot loader will erase the configuration data saved in flash memory.

  • Page 19: Appendix A-Pin Assignments

    Appendix A—Pin Assignments ETHERNET Ports (RJ45) ETHERNET LAN PORTS (10/100BASE-T) Connection # PIN # Descriptions +12Vdc Input +12Vdc Input Ethernet TX (+)/LAN1 Ethernet TX (-)/LAN1 Ethernet RX (+)/LAN1 Ethernet RX (-)/LAN1 Ground Ground PoE (+) Input PoE (+) Input Ethernet TX (+)/LAN2 Ethernet TX (-)/LAN2 Ethernet RX (+)/LAN2 Ethernet RX (-)/LAN2 PoE (-) Input PoE (-) Input Y SERIES EXA100 USER GUIDE www.teledex.com...

  • Page 20: Appendix B-Specifications

    • Quarter Blank Spec x 2 • IEEE 802.1x • KeyStone Jack x 1 • RF Operating Frequency: 2.412-2.497 GHz • Connector Switch x 1 (2.4 GHz ISM Band) • QIG for Troubleshooting • ddRF Output Power: 15dBm • Water-Proof Sealed PE Bag (for ATU-R&QIG) • Antenna Gain: 2dBi NOTE: Specifications are subject to change Bridge Functions without notice. • IEEE 802.1d • VLAN Support • Spanning Tree Algorithm • IGMP Proxy www.teledex.com Y SERIES EXA100 USER GUIDE...

  • Page 21: Appendix C-Parameter Rules

    0: disable Direction 1: enable Grant(RDG) STBC HT_STBC=1 Aggregation HT_AMSDU=0 MSDU(A-MSDU) Auto Block ACK HT_AutoBA=1 Decline BA HT_BADecline=0 Request HT Disallow HT_DisallowTKIP=1 TKIP Network Mode-11n WirelessMode=6 only(2.4G) Operating Mode HT_OpMode=0 0: Mixed Mode 1: Green Field Channel HT_BW=1 0: 20 BandWidth 1: 20/40 Y SERIES EXA100 USER GUIDE www.teledex.com...
  • Page 22 1 - 255 (DTIM) Fragment Threshold FragThreshold=2346 range 256 - 2346 2346 Advanced RTS Threshold RTSThreshold=2347 range 1 - 2347 2347 Wireless Settings TX Power TxPower=100 range 1 Short Preamble TxPreamble=1 0: disable 1: enable Short Slot ShortSlot=1 Tx Burst TxBurst=1 Pkt_Aggregate PktAggregate=1 IEEE 802.11H IEEE80211H=0 Support www.teledex.com Y SERIES EXA100 USER GUIDE...
  • Page 23 OPENWEP EncrypType=WEP Default Key DefaultKeyID=1 (SSID1;SSID2;SSID3;SSID4;SSID5) 1,1,1,1,1 from:1-4 WEP Key 1 Key1Str1= (SSID1;SSID2;SSID3;SSID4;SSID5) KeyStr1=blank Key1Type=0 keyType: 0 - 1 KeyType=0 0: Hex WEP Key 2 Key2Str1= 1: ASCII Key2Type=0 WEP Key 3 Key3Str1= Key3Type=0 WEP Key 4 Key4Str1= Key4Type=0 Security Mode- AuthMode=SHARED SHAREDWEP EncrypType=WEP Default Key DefaultKeyID=1 (SSID1;SSID2;SSID3;SSID4;SSID5) 1,1,1,1,1 from:1-4 Y SERIES EXA100 USER GUIDE www.teledex.com...
  • Page 24 WPA Algorithms EncrypType= (SSID1;SSID2;SSID3;SSID4;SSID5) TKIP or AES Pass Phrase WPAPSK1= WPAPSK2= WPAPSK3= WPAPSK4= WPAPSK5= Key Renewal RekeyInterval=3600 (SSID1;SSID2;SSID3;SSID4;SSID5) 3600 Interval 0 - 4194303 Security Mode-WPA2 AuthMode=WPA2 WPA Algorithms EncrypType= (SSID1;SSID2;SSID3;SSID4;SSID5) TKIP or AES Key Renewal RekeyInterval=3600 (SSID1;SSID2;SSID3;SSID4;SSID5) 3600 Interval 0 - 4194303 www.teledex.com Y SERIES EXA100 USER GUIDE...
  • Page 25 WPA Algorithms EncrypType= (SSID1;SSID2;SSID3;SSID4;SSID5) blank TKIP or AES Key Renewal RekeyInterval=3600 (SSID1;SSID2;SSID3;SSID4;SSID5) 3600 Interval 0 - 4194303 IP Address RADIUS_Server= (SSID1;SSID2;SSID3;SSID4;SSID5) blank Port RADIUS_Port=1812 (SSID1;SSID2;SSID3;SSID4;SSID5) 1812 Shared Secret RADIUS_Key1= blank RADIUS_Key2= RADIUS_Key3= RADIUS_Key4= RADIUS_Key5= Session session_timeout_interval=0 (SSID1;SSID2;SSID3;SSID4;SSID5) Timeout Security Mode- AuthMode=OPEN 802.1x EncrypType=WEP Y SERIES EXA100 USER GUIDE www.teledex.com...
  • Page 26 CCK;CCK;CCK;CCK CCK;CCK;CCK;CCK Wireless OFDM;OFDM;OFDM;OFDM Distribution HTMIX;HTMIX;HTMIX;HTMIX System GREENFIELD;GREENFIELD;GREENFI ELD;GREENFIELD EncrypType WdsEncrypType= (SSID1;SSID2;SSID3;SSID4;SSID5) NONE NONE · WEP · TKIP · AES Encryp Key Wds0Key= blank Wds1Key= Wds2Key= Wds3Key= AP MAC WdsList= blank Address WDS Mode-Repeater WdsEnable=3 Mode Phy Mode WdsPhyMode= CCK;CCK;CCK;CCK CCK;CCK;CCK;CCK OFDM;OFDM;OFDM;OFDM HTMIX;HTMIX;HTMIX;HTMIX GREENFIELD;GREENFIELD;GREENFI ELD;GREENFIELD www.teledex.com Y SERIES EXA100 USER GUIDE...
  • Page 27 Set Community SNMPWRITCOMM=private private System Name SNMPpsysname=wireless wireless System Location SNMPpsyslocation=unknown unknown System Contact SNMPpsyscontact=unknown unknown Trap Manager IP SNMPtrap=0.0.0.0 0.0.0.0 TR-069 Client TR-069 Settings TR69Enabled=0 0: disable 1: enable ACS URL TR69ACSurl= blank ACS Username TR69Username= blank ACS Password TR69Password= blank Inform Interval TR69InformInterval= blank Y SERIES EXA100 USER GUIDE www.teledex.com...
  • Page 28 Toll Free: +1.800.462.9446 Tel: + 1.719.638.8821 Email: info@teledex.com www.teledex.com © 2013 Cetis, Inc. Product specifications and descriptions in this document subject to change without notice. Cetis , Teledex , TeleMatrix , Scitec , ExpressNet , and ® ® ® ® Teledex iPhone are trademarks or registered trademarks of Cetis, Inc.
  • Page 29 A Better WAy to ConneCt. Y SerieS eXP100 ADSL 2+ router intelligent networking solutions for a connected world.

  • Page 30: Specifications

    Two back-mounted ADSL Cat5 iDC connectors are used to supply power/ • ADSL Standard ITU-T G.992.5, ITU-T G.992.3, telephony and to connect to the eXA100 wireless ITU-T G.992.1, ANSI T1.413 Issue 2 module. Wired connections benefit from the • G.992.5 (ADSL2+) ADSL 2+ standard, offering download speeds of • G.992.3 (ADSL2)
  • Page 31 A BETTER WAY TO CONNECT. Y SERIES EXP212, EXP224, EXP248 (ADSL2+ IP DSLAM) Intelligent networking solutions for a connected world.

  • Page 32: Technical Specifications

    HIGH RELIABILITY AND EASY The Teledex Y Series EXP2(12,24,48) DSLAM MAINTENANCE offers an efficient, scalable, easily-deployed solution to provide ADSL 2+ speeds for offices • Equipped with a fan and air filter unit, low and guest rooms. Advanced features include power requirements plus full diagnostic and QoS, Multicast, and subscriber management. alarm reporting capability.
  • Page 33 PERFORMANCE MONITORING • RFC 2674 Q MIB • RFC 1757 RMON MIB, Group 1,2,3,9 • Monitors of Line Attenuation, Noise Margin, • ADSL Line MIB Current Rate, Loss of Signal, Loss of Framing • Proprietary MIB Loss of Power and Error Second Performance Data DIMENSIONS • Provides 15-Minute and 1-Day Counters for • 1.5U: 66 mm x 482 mm x 275 mm (H x W x D) History Record for 12 or 24 Ports with Splitter Built-In or No ALARM AND STATUS SURVEILLANCE Splitter • Automatic Alarm/LED Indication for Alarm ENVIRONMENTAL and System Status • Operating Temperature: –10°C to 65°C • Maintenance Signal for OAM Functionality • Operating Humidity: 5% to 95% NETWORK MANAGEMENT...
  • Page 34 Toll Free: +1.800.462.9446 Tel: + 1.719.638.8821 Email: info@teledex.com www.teledex.com © 2013 Cetis, Inc. Product specifications and descriptions in this document subject to change without notice. Cetis , Teledex ® , TeleMatrix ® , Scitec ® , ExpressNet ® , and Teledex iPhone are trademarks or registered trademarks of Cetis, Inc. TDX-EN-DSLAM-032013...

Table of Contents