Important Safety Instructions - National Semiconductor SolarMagic User Manual

National Semiconductor • SolarMagic Weather Station User Guide

1.1 Important Safety Instructions

Z
!
!
!
Z
Z
Z
2
This manual contains important safety instructions that should be
followed during the installation and maintenance of this product. To
reduce the risk of electrical shock, and to ensure the safe installation
and operation of this product, the following safety symbols have been
placed throughout this manual to indicate dangerous conditions and
important safety instructions.
WARNING:
A dangerous voltage or condition exists in this area. Use extreme caution when
performing these tasks.
CAUTION:
This procedure is critical to the safe installation or operation of the unit. Follow
these instructions closely.
NOTE:
This statement is important for best performance. Follow these instructions
closely.
CAUTION: Follow All Electrical Codes
All electrical work must be done in accordance with local, national, and/or
international electrical codes.
CAUTION: Read All Instructions
Before installing or using this device, read all instructions and cautionary markings
located in (or on) the products and the manual.
WARNING: Use Insulated Tools
To reduce the chance of short-circuits when installing or working with the
products use insulated tools.
WARNING: Remove Jewelry
Remove all jewelry while installing this system. This will greatly reduce the chance
of accidental exposure to live circuits.
WARNING: Stay Away from Live Wires
Make sure the weather station mast and sensor frame cannot get in contact with
live wires. This could cause serious injury, death or fire.