Access HD 1010 Owner's Manual page 4

Dedicated RCU
Remote Key functions
FOR TECHNICAL ASSISTANCE OR TO
PURCHASE A NEW OR UPGRADED REMOTE
CONTROL, VISIT WWW.ACCESSHD.TV
Rev: Sept 22, 2008
1. MUTE: Press to mute the sound. Pressing again will
restore the sound.
2. CH3/4: Press and hold for 3 seconds to select NTSC
Channel 3 or Channel 4 on Models 1020, 1020A,
1030, 1050, and 1080.
3. CH+: Press to view the next channel. This will not
work if you are in any of the on-screen menus.
4. CH-: Press to view the previous channel. This will
not work if you are in any of the on-screen menus.
5. INFO: Press to display information about the current
channel.
6. EXIT: Press to exit from the set-up menus.
7. OK: Used to select or confirm an item when using
the on-screen menus.
8. : Used to navigate right in the on-screen menus
9. RECALL: Press to return to the last channel you
were watching.
10. –: Press to input a dash into your channel selection
eg. 23-1.
11. CAPTION: Press to view closed captions when
broadcast with the channel. Press to select services
1-6.
12. AUDIO: Often more than one audio track is
broadcast with the picture, such as other languages.
Press to toggle between different audio tracks.
13. STANDBY: Press to switch the converter box on
and off. When not in use it is recommended that you
switch the converter box off to save your power bill
and the environment. An automatic power down
function is also available in the on-screen menu.
VOL+: Press to increase the audio volume.
14.
1020A-1080, only adjustable through RCA audio out jacks)
15. VOL-: Press to decrease the audio volume.
1020A-1080, only adjustable through RCA audio out jacks)
16. : Used to navigate up in the on-screen menus.
17. MENU: Press to display the on-screen menus, or to
revert to the previous menu.
18. : Used to navigate left in the on-screen menus.
19. : Used to navigate down in the on-screen menus.
20. NUMBER KEYS: Press to directly select a particular
channel instead of using the UP and DOWN button.
21. ASPECT: Press to change the picture output
between NORMAL (4:3), Zoom (4:3 from 16:9),
Wide (for 16:9 TV set) and Cinema (4:3 from 16:9).
22. SIGNAL: Press to show the signal strength from
your antenna for a particular channel.
OR CALL 1-800-393-1246
(Models
(Models
Page 4 of 13