Advertisement
Quick Links
Quick Start Guide
1:21 USB Flash Drive Copy Cruiser™
Welcome!
Congratulations on your purchase of an Aleratec
1:21 USB Flash Drive Copy Cruiser, considered
by industry experts to be one of the finest USB
flash drive duplicators available.
The entire Aleratec team is committed to
providing you with courteous service. Our
knowledgeable staff will strive to make owning
and operating your new Aleratec USB flash drive
duplicator a pleasant experience.
This Quick Start Guide will lead you step-by step
through the basic operation procedures of your
USB flash drive duplicator.
For more detailed information on configuring the
1:21 USB Flash Drive Copy Cruiser and applying
it's various capabilities, please refer to the User
Guide on the CD included.
We at Aleratec appreciate your selection of
our product, and wish you great success and
enjoyment of your new USB flash drive duplicator.
Key Items on the 1:21 USB Flash Drive Copy Cruiser
• 1:21 USB Flash Drive Copy Cruiser
• Power Cord
• USB Cable
• Installation CD
• Quick Start Guide (this document)
• Aleratec Registration Card
The 1:21 USB Flash Drive Copy Cruiser is a USB flash
drive (thumb drive) duplicator.
• Duplicates up to 21 USB flash drives simultaneously.
• Simple to use; no set-up required. Plug it in and
USB 2.0 Slots
(21)
Power Switch
Part No. 330104
Included Items
Product Features
start copying immediately.
USB Connector
Advertisement
Related Manuals for Aleratec 330104
Summary of Contents for Aleratec 330104
-
Page 1: Quick Start Guide
• Quick Start Guide (this document) providing you with courteous service. Our knowledgeable staff will strive to make owning • Aleratec Registration Card and operating your new Aleratec USB flash drive duplicator a pleasant experience. Product Features This Quick Start Guide will lead you step-by step... - Page 2 3. In the box labeled “File Name”, you may enter the name of what you want to call the newly created image. Include .img at the end of the name. All image files are automatically saved in C:\USB_imagefiles\. 4. Click on “Start” to begin the image creation process. Image File Copying 1. From the main menu, choose “Clone Image File”. The “Clone Image File” module will then pop up. 2. Click the “Browse” button on the left hand to select the image file that you want to clone. 3. Select the drives that you wish to clone to. 4. Click the “Start” button to begin the cloning process. Aleratec USB Key Cleaner 1. This utility is used to help solve the issue of USB drives not being recognized by your computer. 2. From the main screen, click “Run Now” 3. You will then be prompted to restart your computer now or later. In order for the cleaning process to take effect you must restart your computer. 4. Upon restarting your computer you will notice in the system tray “Found New Hardware” notifications as Windows sets up the devices that are currently plugged into one of the USB ports on your computer. Note: This could take a few minutes to complete depending on the number of devices you have connected. 5. After all the device drivers are reinstalled you are ready to begin the duplication process again. Technical Support Addresses and Phone Numbers • By e-mail: support@aleratec.com...
Need help?
Do you have a question about the 330104 and is the answer not in the manual?
Questions and answers