4. If using a Fixed IP you need to enter the IP address, Subnet Mask, Default Gateway. For further assistant to the above settings you may
need to contact your network administrator
Wireless LAN Setup
Note: Wireless LAN is only available with Verbatim model No's 47541/47543
1. Plug-in the Wi-Fi USB Dongle into either of the 2 USB ports. The player will detect the dongle automatically
2. Select Wireless Setup and press Enter
3. Choose a profi le name. For example: Connection 1, press Enter
4. Connection mode: select either Infrastructure (AP) or Peer to Peer (Ad Hoc) and press Enter. Infrastructure (AP) will detect any wireless
networks available.
5. The available networks will appear in a list. Select your network and press Enter to proceed.
6. Enter the WEP key or WPA key for the network
7. Press OK to fi nish the setting. The Wi-Fi signal strength is shown on the right hand side.
Note: The player with Wi-Fi dongle will only be able to recognise the WEP with Open system, and only the Key 1 will be recognisable. Also, only WPA-Personal, WPA2-Personal and WPA-