Output; Response - Radio Shack Sound Level Meter Owner's Manual

Hide thumbs Also See for Sound Level Meter:
Table of Contents

Advertisement

OUTPUT

The phono-type
connect the meter to recording or other
measurement equipment. For example,
you might use an audio patch cord to con-
nect the meter to the AUX or high-level in-
put of a recorder.
Note: The meter response will not be flat,
due to the A- and C-weighting networks.
Set
so the maximum needle de-
RANGE
flection is never greater than +4, to pre-
vent the built-in amplifier from clipping.
Use A-weighting for voice recordings, or
C-weighting for full-range musical materi-
al. The
OUTPUT
ed to high-impedance headphones, or an
oscilloscope, a frequency analyzer, or oth-
er test equipment.

RESPONSE

The
RESPONSE
and
FAST
SLOW
meter reacts quickly to changes in the
sound level, showing you the peak sound
levels present in the environment. In the
position, the meter is damped and
SLOW
indicates an average-value sound level.
10
jack lets you
OUTPUT
jack can also be connect-
selector has two settings:
. In the
position, the
FAST
Controls

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents