Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Summary of Contents for Dakota Computer Solutions VoyagerUTP
- Page 1 P P P P U U U U T T T T P P P P Keyboard, Monitor & Mouse Extender Installation and Operation Manual www.dakota-us.com Dakota Computer Solutions • 1579 Lexington Road • Green Oaks, IL 60048 • Tel: 847-816-1337 •...
-
Page 2: Limited Warranty
LIMITED WARRANTY Dakota Computer Solutions warrants the VoyagerUTP™ to be in good working order for one year from the date of purchase from Dakota Computer Solutions or an authorized dealer. Should this product fail to be in good working order at any time during this one-year warranty period, Dakota Computer Solutions will, at its option, repair or replace the Unit as set forth below. - Page 3 VGA, Super VGA, XGA & RGB (Sync-on-Green) * If your PC does not have a PS/2 style mouse port, the VoyagerUTP may be connected to a serial port of your PC. This is done via a mouse protocol converter (2146-00C). Please contact your dealer for further details.
-
Page 4: Getting Started
* Use only the power transformer supplied with this product. The VoyagerUTP has a PS/2 type keyboard connector. If your system uses the AT type 5-pin DIN connector or keyboard, adaptors will be required these are commonly available through your dealer. -
Page 5: Quick Setup System Guide
Rear View of Remote Unit Front View of Remote Unit Interconnect Peak Keyboard Mouse Power Remote Unit Power Supply Figure 1. Connecting the VoyagerUTP. MOUSE KEYBOARD MONITOR Voyager UTP Remote Unit Remote Unit Remote Unit Remote Unit Cable Length Jumpers... -
Page 6: Installation Procedure
Installation Procedure The VoyagerUTP consists of a Local and a Remote Unit interconnected by a single structured cable that carries all the necessary signals. The Local unit is connected to the PCs keyboard, VGA ports and PS/2 mouse. The keyboard, monitor and mouse are connected directly to the Remote Unit. The Remote Unit is powered by an AC power supply (included) and the PC powers the Local Unit via the keyboard connection. - Page 7 Figure 1 illustrates how the units are interconnected. 1. Switch off your PC and connect the VoyagerUTP, keyboard, monitor and mouse as shown in Figure 2. Set the ‘Peak’ control on the Remote Unit about midway, and set the ‘EQ’ control fully counter- clockwise (no video compensation).
-
Page 8: Operation
OPERATION Keyboard & Mouse Emulation The VoyagerUTP uses a microprocessor to emulate the keyboard and mouse. This means that a keyboard and/or mouse do not have to be connected to the Voyager’s Remote Unit for your PC to boot. The PC will boot with only the Local Unit of the VoyagerUTP connected. -
Page 9: Utp / Stp Connection Cable Wiring
The Local-Remote interconnection cable is terminated in RJ45 connectors and should be wired according to the EIA/TIA 568 (Scheme B preferred) industry standard. Orientation: Looking into the RJ45 socket on the VoyagerUTP unit, Pin 1 is on the left and Pin 8 on the right. -
Page 10: Troubleshooting
Some PC’s have a port re-mapping feature which allows a keyboard or mouse to be plugged into either PS/2 port. Try crossing over the cables between the local unit and PC. (i.e. KB to Mouse & Mouse to KB.) Dakota Computer Solutions • 1579 Lexington Road •... - Page 11 DDC. c) Disable the option "Automatically detect plug and play monitors". This command is found in Control Panel/Display Properties/Settings (tab)/Advanced (button)/Monitor(tab). Dakota Computer Solutions • 1579 Lexington Road •...
-
Page 12: General Questions
It may be possible to run up to 1,600ft (500m) at the standard VGA resolution (640x480). However, we cannot guarantee that this will work in every instance. Can VoyagerUTP units be chained to allow operation over more than 1,000 feet (300 meters)? Two units may be chained to allow operation over longer distances. -
Page 13: Service Information
Computer Solutions. Technical support If you cannot determine the nature of a problem, please call Dakota Computer Solutions and ask for Technical Support. If possible, call from a telephone located near the unit; we may be able to solve your problem directly over the telephone. If we cannot solve your problem on the telephone, or determine that the fault is in the unit, we will issue a Return Material Authorization (RMA) number that must appear on the outside of all returned products. -
Page 14: Appendix A. General Specifications
Ultra View Enhanced KVM Switch - 2, 4, 8, 12 & 16 Ports - Multiplatform 1118-xx The VoyagerUTP is also compatible with many other devices that use industry standard keyboard, monitor and mouse signals. For information regarding these products, contact your Dakota Representative (847) 816-1337.
Need help?
Do you have a question about the VoyagerUTP and is the answer not in the manual?
Questions and answers